Difference between revisions of "KAmodHTS221"
Anna Kubacka (talk | contribs) |
Anna Kubacka (talk | contribs) |
||
(4 intermediate revisions by 2 users not shown) | |||
Line 3: | Line 3: | ||
[https://kamami.pl/czujniki-wilgotnosci/558410-kamodhts221-modul-czujnika-wilgotnosci-temperatury-z-ukladem-hts221.html KAmodHTS221] is a module, which allow to make a measurement of humidity and temperature. Thanks to embedded voltage regulator and logic level translator, it can be used in embedded system with power supply 2.5 - 5.5V. Module KAmodHTS221 bases on humidity / temperature sensor HTS221 from STMicroelectronics. The characteristic features of this sensor are: measurement possibility in range 0 - 60°C or air humidity in range 0 - 100%. | [https://kamami.pl/czujniki-wilgotnosci/558410-kamodhts221-modul-czujnika-wilgotnosci-temperatury-z-ukladem-hts221.html KAmodHTS221] is a module, which allow to make a measurement of humidity and temperature. Thanks to embedded voltage regulator and logic level translator, it can be used in embedded system with power supply 2.5 - 5.5V. Module KAmodHTS221 bases on humidity / temperature sensor HTS221 from STMicroelectronics. The characteristic features of this sensor are: measurement possibility in range 0 - 60°C or air humidity in range 0 - 100%. | ||
− | + | ||
<center> | <center> | ||
− | [[ | + | [[File:KAmodHTS221_modul.png|none|400px|thumb|center]] |
</center> | </center> | ||
Line 41: | Line 41: | ||
===== Electrical schematic ===== | ===== Electrical schematic ===== | ||
<center> | <center> | ||
− | [[ | + | [[File:KAmodHTS221_schemat.png|none|800px|thumb|center]] |
</center> | </center> | ||
===== Outputs description ===== | ===== Outputs description ===== | ||
Line 48: | Line 48: | ||
{| class="wikitable" style="width: 1000px;" | {| class="wikitable" style="width: 1000px;" | ||
|- | |- | ||
− | ! style="text-align: center;" rowspan="10"|[[ | + | ! style="text-align: center;" rowspan="10"|[[File:KAmodHTS221 obrys PCB.png|center|200px]] |
! style="text-align: center;"|JP1 | ! style="text-align: center;"|JP1 | ||
! style="text-align: center;"|I2C | ! style="text-align: center;"|I2C | ||
Line 89: | Line 89: | ||
*[http://mikrokontroler.pl/2016/08/31/projekt-kamodhts221-czujnik-temperatury-wilgotnosci-powietrza-ka Example for Arduino on MIKROKONTROLER.pl] | *[http://mikrokontroler.pl/2016/08/31/projekt-kamodhts221-czujnik-temperatury-wilgotnosci-powietrza-ka Example for Arduino on MIKROKONTROLER.pl] | ||
*[http://hobbyspace.pl/hts221-czujnik-temperatury-i-wilgotnosci-powietrza-z-wyjsciem-cyfrowym/ Example for STM32 on HobbySpace.pl] | *[http://hobbyspace.pl/hts221-czujnik-temperatury-i-wilgotnosci-powietrza-z-wyjsciem-cyfrowym/ Example for STM32 on HobbySpace.pl] | ||
− | |||
− | |||
− |
Latest revision as of 09:20, 23 September 2020
Contents
Description
KAmodHTS221 is a module, which allow to make a measurement of humidity and temperature. Thanks to embedded voltage regulator and logic level translator, it can be used in embedded system with power supply 2.5 - 5.5V. Module KAmodHTS221 bases on humidity / temperature sensor HTS221 from STMicroelectronics. The characteristic features of this sensor are: measurement possibility in range 0 - 60°C or air humidity in range 0 - 100%.
Basic features and parameters
- Humidity / temperature sensor HTS221 from STMicroelectronics company
- Measurement range: 0 - 100% (humidity) / 0 - 60°C (temperature)
- Humidity measurement accuracy: ± 6% (0 - 100% RH) / ± 4.5% (20 - 80% RH)
- Temperature measurement accuracy: ± 1°C (0 - 60°C) / ± 0.5°C (15 - 40°C)
- Power supply voltage: 2.5V - 5.5V
- Power consumption: 9mA
- Measurement data rate (ODR): 1 - 12.5[Hz]
- ADC converter resolution: 16 bits
- Communication interface: SPI / I2C
- Embedded voltage regulator and logic level translator (SDA and SCL lines)
- Data ready output (DRDY)
- Place for soldering of pin header
- Mounting holes 3mm
- Module size (without connector): 24mm x 15mm x 3mm
Standard equipment
Code | Description |
---|---|
KAmodHTS221 |
|
Electrical schematic
Outputs description
JP1 | I2C | SPI | |
---|---|---|---|
+3.3V | Module power supply | ||
+VIN | |||
GND | |||
SDA/SDI/SDO | SDA | SDI/SDO | |
SCL/SPC | SCL | SPC | |
SDO/SA0 | SA0 | - | |
GND | Additional ground | ||
CS | CS | CS | |
DRDY | Data ready signalization |