View source for KAmodLED8 - Kamamilabs.com

__jzpdf__
====== Description ======
KAmodLED8 module allows observation of state of 8 lines with LEDs driven by digital buffers 

<center>
[[File:KAmodLED8_(PL).jpg|none|400px|thumb|center]]
</center>
 
===== Basic features =====
* 8 LEDs (lit by high logic level) 
* 8-channel buffer (74LVC541) 
* 5V input lines 
* Supply voltage 2,7...5,5VDC 
* 10-pin connector 


===== Standard equipment  =====
<center>
{| class="wikitable"  style="width: 1000px;"
|-
! style="text-align: center;"|Code
! style="text-align: center;"|Description
|-
| style="text-align: center;"|<b>KAmodLED8</b>
| style="text-align: left;"|
* Assembled module 
|}
</center>

===== Schematics  =====

<center>
[[File:KAmodLED8_schemat.png|none|800px|thumb|center]]
</center>

===== Module layout  =====

<center>
[[File:KAmodLED8_pcb.png|none|400px|thumb|center]]
</center>

===== Connector =====
D0...D7 LEDs are lit by high level on D0...D7 inputs of Con1 connector. Con1 pinout is shown on figure below. 


<center>
[[File:KAmodLED8_led.png|none|400px|thumb|center]]
</center>

===== Module usage =====
KAmodLED8 module is equipped with 2×5-pin connector (2.54mm raster), you can use it to connect module to any device using 10-wire flat cable (for example CAB_IDC10FF-30 available at kamami.com) or single wires (for example CAB_A available at kamami.com). 

<center>
[[File:zl4st7+kamodkb4x4+kamodled8.jpg|none|600px|thumb|center]]
</center>