Actions

KAmodLSM303

Revision as of 09:19, 23 September 2020 by Anna Kubacka (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

KAmodLSM303 is a module with MEMS LSM303D type. Chip has a digital output (with using I2C or SPI interface) and allow to make a measurement of acceleration and magnetic field value in three axis. Thanks to programmable interrupt outputs, it is possible e.g. wake up a microcontroller after free fall detection or object movement. Module can be used in system with power supply 2.5 - 5.5V.

KAmodLSM303 moduł.png
Basic features and parameters
  • LMS303D chip (accelerometer and magnetometer) from STMicroelectronics
  • Measurement range of accelerometer: ±2 / ±4 / ±6 / ±8 / ±16g
  • Measurement range of magnetometer: ±2 / ±4 / ±8 / ±12 Gauss
  • Power supply voltage: 2.5V - 5.5V
  • Sleep mode / Low power mode
  • Communication interface: SPI / I2C
  • Embedded voltage regulator and logic level translator (SDA and SCL lines)
  • Programmable interrupt generator (by free fall, movement detection or magnetic field detection)
  • Place for soldering of pin header
  • Mounting holes 3mm
  • Module size (without connector): 27mm x 15mm x 3mm
Standard equipment
Code Description
KAmodLSM303
  • Assembled and launched module
  • Pin header (male and angle) for soldering
Electrical schematic
KAmodLSM303 schemat.png
Outputs description
KAmodLSM303 obrys PCB.png
JP1 I2C SPI 3-wire SPI 4-wire
+3.3V Module power supply
+VIN
GND
SDA/SDI/SDO SDA SDI/SDO SDI
SCL/SPC SCL SPC SPC
SDO/SA0 SA0 - SDO
CS CS CS CS
INT2 Interrupt 2 output
INT1 Interrupt 1 output
External links