Actions

KAmodLSM6DS3

Revision as of 08:17, 10 August 2018 by Admin (talk | contribs) (Text replacement - "__jzXpdf__" to "__jzpdf__")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

KAmodLSM6DS3 is a module with MEMS LSM6DS3 type. Chip has a digital output (with using I2C or SPI interface) and allow to make a measurement of acceleration and angle velocity in three axis. Thanks to programmable interrupt outputs, it is possible e.g. wake up a microcontroller after free fall detection or object movement. Module can be used in system with power supply 2.5 - 5.5V.

KAmodLSM6DS3 modul.png
Basic features and parameters
  • LSM6DS3 chip (accelerometer and gyroscope) from STMicroelectronics
  • Measurement range of accelerometer: ±2 / ±4 / ±8 / ±16g
  • Measurement range of gyroscope: ±125 / ±245 / ±500 / ±1000 / ±2000 angle/second (dps)
  • Power supply voltage: 2.5V - 5.5V
  • Sleep mode / Low power mode
  • Communication interface: SPI / I2C
  • Embedded voltage regulator and logic level translator (SDA and SCL lines)
  • Configurable interrupt generator
  • Possibility of subordinate I2C interface connection  (I2C HUB)
  • Place for soldering of pin header
  • Mounting holes 3mm
  • Module size (without connector): 27mm x 16mm x 3mm
Standard equipment
Code Description
KAmodLSM6DS3
  • Assembled and launched module
  • Pin header (male and angle) for soldering
Electrical schematic
KAmodLSM6DS3 schemat.png
Outputs description
KAmodLSM6DS3 obrys PCB.png
JP1 I2C SPI 3-wire SPI 4-wire
+3.3V Module power supply
+VIN
GND
SDA SDA SDI/SDO SDI
SCL SCL SPC SPC
SDO/SA0 SA0 - SDO
CS CS CS CS
INT2 Interrupt 2 output
INT1 Interrupt 1 output
External links