Difference between revisions of "KAmodWS2812-1"
Anna Kubacka (talk | contribs) |
Anna Kubacka (talk | contribs) (→Output description) |
||
Line 41: | Line 41: | ||
{| class="wikitable" style="width: 1000px;" | {| class="wikitable" style="width: 1000px;" | ||
|- | |- | ||
− | ! style="text-align: center;" rowspan="10"| [[ | + | ! style="text-align: center;" rowspan="10"| [[File:KAmodWS2812-1_obrys.png|center|200px]] |
! style="text-align: center;"|JP1 | ! style="text-align: center;"|JP1 | ||
! style="text-align: center;"|Function | ! style="text-align: center;"|Function |
Revision as of 21:42, 5 July 2018
Contents
Description
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects.
Basic features and parameters
- Tri-color LED (RGB) WS2812 type, with embedded controller
- Possibility of series connection of additional modules without extra signal lines
- Each of basic colors can controlled with up to 256 brightness levels
- Possibility of displaying more than 16.7 mln light tone
- Power supply voltage: 5V – 7V
- Wire that connects two modules can be up to 5m length without additional amplifier
- Holes for soldering of pin connector
- Two mounting holes 3mm
- Module size (without connectors): 18mm x 11.5mm x 3.5mm
Standard equipment
Code | Description |
---|---|
KAmodWS2812-1 |
|
Electrical schematic
Output description
JP1 | Function | |
---|---|---|
VDD | Module power supply | |
DIn | Control signal input | |
DOut | Control signal output | |
GND | Ground |