KAmodLED8 module allows observation of state of 8 lines with LEDs driven by digital buffers
- 8 LEDs (lit by high logic level)
- 8-channel buffer (74LVC541)
- 5V input lines
- Supply voltage 2,7...5,5VDC
- 10-pin connector
D0...D7 LEDs are lit by high level on D0...D7 inputs of Con1 connector. Con1 pinout is shown on figure below.
KAmodLED8 module is equipped with 2×5-pin connector (2.54mm raster), you can use it to connect module to any device using 10-wire flat cable (for example CAB_IDC10FF-30 available at kamami.com) or single wires (for example CAB_A available at kamami.com).