KAmodBAR-I2C - Revision history

Grzegorzbecker at 16:17, 1 November 2024

2024-11-01T16:17:57Z

← Older revision		Revision as of 16:17, 1 November 2024
Line 1:		Line 1:
	__jzpdf__		__jzpdf__
	====== Description ======		====== Description ======
	KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 to 115 kPa		[https://kamami.pl/en/kamod-kamami-peripheral-modules/179438-kamodbar-i2c-pressure-sensor-module-with-i2c-interface-mpl115a2-5906623432356.html KAmodBAR-I2C] is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 to 115 kPa

	<center>		<center>

Anna Kubacka at 12:36, 22 September 2020

2020-09-22T12:36:27Z

← Older revision		Revision as of 12:36, 22 September 2020
Line 2:		Line 2:
	====== Description ======		====== Description ======
	KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 to 115 kPa		KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 to 115 kPa

	<center>		<center>
	[[File:kamodbar_skos_1.jpg\|none\|400px\|thumb\|center]]		[[File:kamodbar_skos_1.jpg\|none\|400px\|thumb\|center]]

Wlodzimierzhepner: /* Podstawowe właściwości */

2018-10-08T13:10:26Z

Podstawowe właściwości

← Older revision		Revision as of 13:10, 8 October 2018
Line 7:		Line 7:
	</center>		</center>

	===== ~~Podstawowe właściwości~~ =====		===== Basic features =====
	* Pressure sensor ~~BMP085~~ from ~~BOSCH~~		* Pressure sensor MPL115A2 from Freescale
	* Pressure measurement in range from ~~300~~ to ~~1100hPa~~		* Pressure measurement in range from 50 to 115kPa
	* Accuracy 1 ~~hPa~~		* Accuracy 1 kPa
	* Power supply voltage 1.62 do 3.6V		* Power supply voltage 2.375 do 5.5V
	* I2C interface		* I2C interface

Wlodzimierzhepner: /* Description */

2018-08-29T12:44:04Z

Description

← Older revision		Revision as of 12:44, 29 August 2018
Line 1:		Line 1:
	__jzpdf__		__jzpdf__
	====== Description ======		====== Description ======
	KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 do 115 kPa		KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 to 115 kPa

	<center>		<center>

Anna Kubacka: Created page with "jzpdf ====== Description ====== KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 do 115 kPa..."

2018-08-27T12:15:58Z

Created page with "__jzpdf__ ====== Description ====== KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 do 115 kPa..."

New page

__jzpdf__
====== Description ======
KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 do 115 kPa

<center>
[[File:kamodbar_skos_1.jpg|none|400px|thumb|center]]
</center>

===== Podstawowe właściwości =====
* Pressure sensor BMP085 from BOSCH
* Pressure measurement in range from 300 to 1100hPa
* Accuracy 1 hPa
* Power supply voltage 1.62 do 3.6V
* I2C interface

===== Standard equipment =====
<center>
{| class="wikitable" style="width: 1000px;"
|-
! style="text-align: center;"|Code
! style="text-align: center;"|Description
|-
| style="text-align: center;"|<b>KAmodBAR-I2C</b>
| style="text-align: left;"|
* Assembled module board
|}
</center>

===== Schematic =====

<center>
[[File:kamodbar_sch.png|none|400px|thumb|center]]
</center>

===== View of board =====

<center>
[[File:kamodbar_pcb.png|none|400px|thumb|center]]
</center>

===== I2C interface =====
MPL115A2 chip is equipped with I2C interface available on Con3, Con4 i Con5. Con4 i Con5 connectors are compatible with Kamami development board standard (e.g. ZL5PIC, ZL15AVR, ZL27ARM, ZL29ARM, ZL30ARM, STM32Butterfly2). To connect module to the boards can be used CAB_HU04-30 cable.

<center>
[[File:kamodbar_conn.png|none|400px|thumb|center]]
</center>

<center>
[[File:cab_hu04.jpg|none|400px|thumb|center]]
</center>

===== Module configuration =====
Con6 connector makes possible to enable MPL115A2 chip or to block I2C interface.
To enable MPL115A2 should be connect SHDN to GND (by putting on a jumper on pins 3 i 4 Con6 or connecting to the microcontroller and setting low state).
To block I2C interface should be connect to pin CS_RES voltage from VCC (by putting on a jumper on pins 1 i 2 Con6 or connecting to the microcontroller and setting high state).

<center>
[[File:kamodbar_conf.png|none|400px|thumb|center]]
</center>

KAmodBAR-I2C - Revision history

Grzegorzbecker at 16:17, 1 November 2024

Anna Kubacka at 12:36, 22 September 2020

Wlodzimierzhepner: /* Podstawowe właściwości */

Wlodzimierzhepner: /* Description */

Anna Kubacka: Created page with "__jzpdf__ ====== Description ====== KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 do 115 kPa..."

Anna Kubacka: Created page with "jzpdf ====== Description ====== KAmodBAR-I2C is a module based on pressure sensor MPL115A2 from Freescale. It makes possible to measurement pressure in range 50 do 115 kPa..."