KAmodLSM303C - Revision history

Anna Kubacka at 08:21, 23 September 2020

2020-09-23T08:21:26Z

← Older revision		Revision as of 08:21, 23 September 2020
Line 2:		Line 2:
	====== Description ======		====== Description ======
	[https://kamami.pl/kamod-kamami/563462-kamodlsm303c-modul-z-trojosiowym-akcelerometrem-magnetometrem.html KAmodLSM303C] is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes. Thanks to the programmable interrupt generator outputs, it is possible to wake up the microcontroller after detecting free fall or object movement. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector, allowing easy attachment of the module to development kits. Due to its small dimensions, the product can be used in many development projects, while the Pmod through connector allows the boards to be connected in series.		[https://kamami.pl/kamod-kamami/563462-kamodlsm303c-modul-z-trojosiowym-akcelerometrem-magnetometrem.html KAmodLSM303C] is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes. Thanks to the programmable interrupt generator outputs, it is possible to wake up the microcontroller after detecting free fall or object movement. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector, allowing easy attachment of the module to development kits. Due to its small dimensions, the product can be used in many development projects, while the Pmod through connector allows the boards to be connected in series.

	<center>		<center>
	[[File:KAmodLSM303C_modul.png\|none\|400px\|thumb\|center]]		[[File:KAmodLSM303C_modul.png\|none\|400px\|thumb\|center]]

Wlodzimierzhepner: /* External links */

2019-10-07T12:40:30Z

External links

← Older revision		Revision as of 12:40, 7 October 2019
Line 130:		Line 130:

	===== External links =====		===== External links =====
	*[~~http~~://download.kamami.pl/~~...~~.pdf ~~Karta katalogowa układu KAmodLSM303C firmy STMicroelectronics~~]		*[https://download.kamami.pl/p563462-lsm303c%20datasheet.pdf LSM303C datasheet]

Wlodzimierzhepner: /* Description */

2019-10-07T12:39:42Z

Description

← Older revision		Revision as of 12:39, 7 October 2019
Line 1:		Line 1:
	__jzpdf__		__jzpdf__
	====== Description ======		====== Description ======
	[https://kamami.pl/kamod-kamami/… KAmodLSM303C] is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes. Thanks to the programmable interrupt generator outputs, it is possible to wake up the microcontroller after detecting free fall or object movement. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector, allowing easy attachment of the module to development kits. Due to its small dimensions, the product can be used in many development projects, while the Pmod through connector allows the boards to be connected in series.		[https://kamami.pl/kamod-kamami/563462-kamodlsm303c-modul-z-trojosiowym-akcelerometrem-magnetometrem.html KAmodLSM303C] is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes. Thanks to the programmable interrupt generator outputs, it is possible to wake up the microcontroller after detecting free fall or object movement. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector, allowing easy attachment of the module to development kits. Due to its small dimensions, the product can be used in many development projects, while the Pmod through connector allows the boards to be connected in series.

	<center>		<center>

Wlodzimierzhepner at 12:35, 7 October 2019

2019-10-07T12:35:55Z

← Older revision		Revision as of 12:35, 7 October 2019
Line 47:		Line 47:
	{\| class="wikitable" style="width: 1000px;"		{\| class="wikitable" style="width: 1000px;"
	\|-		\|-
	! style="text-align: center;" rowspan="10"\| [[File:KAmodLSM303C_obrys_zlacze.png\|center\|~~150px~~]]		! style="text-align: center;" rowspan="10"\| [[File:KAmodLSM303C_obrys_zlacze.png\|center\|350px]]
	! style="text-align: center;"\|JP1 (male connector)		! style="text-align: center;"\|JP1 (male connector)
	! style="text-align: center;"\|JP2 (female connector)		! style="text-align: center;"\|JP2 (female connector)
Line 85:		Line 85:
	{\| class="wikitable" style="width: 1000px;"		{\| class="wikitable" style="width: 1000px;"
	\|-		\|-
	! style="text-align: center;" rowspan="10"\| [[File:KAmodLSM303C_obrys_zlacza_kamami.png\|center\|~~150px~~]]		! style="text-align: center;" rowspan="10"\| [[File:KAmodLSM303C_obrys_zlacza_kamami.png\|center\|350px]]
	! style="text-align: center;"\|Pin number		! style="text-align: center;"\|Pin number
	! style="text-align: center;"\|I2C		! style="text-align: center;"\|I2C

Wlodzimierzhepner at 12:15, 7 October 2019

2019-10-07T12:15:46Z

← Older revision		Revision as of 12:15, 7 October 2019
Line 109:		Line 109:
	The KAmodLSM303C module is equipped with jumpers enabling the connection of pull-up resistors to the VCC power pole to the I2C bus line. The jumpers give the possibility of independent enabled of the pull-up for the SDA and SCL lines.		The KAmodLSM303C module is equipped with jumpers enabling the connection of pull-up resistors to the VCC power pole to the I2C bus line. The jumpers give the possibility of independent enabled of the pull-up for the SDA and SCL lines.
	<center>		<center>
	[[File:KAmodLSM303C_obrys_i2c.png\|none\|~~200px~~\|thumb\|center]]		[[File:KAmodLSM303C_obrys_i2c.png\|none\|400px\|thumb\|center]]
	</center>		</center>

Line 115:		Line 115:
	The KAmodLSM303C module is equipped with a jumper to connect the INT_XL or INT_MAG interrupt output line to the connector compatible with the Pmod standard. Thanks to the ability to disconnect the KAmodLSM303C interrupt line from the Pmod connectors, the user does not have to worry about the consequences of any conflicts arising from connecting modules compatible with Pmod with different logic states.		The KAmodLSM303C module is equipped with a jumper to connect the INT_XL or INT_MAG interrupt output line to the connector compatible with the Pmod standard. Thanks to the ability to disconnect the KAmodLSM303C interrupt line from the Pmod connectors, the user does not have to worry about the consequences of any conflicts arising from connecting modules compatible with Pmod with different logic states.
	<center>		<center>
	[[File:KAmodLSM303C_obrys_int.png\|none\|~~200px~~\|thumb\|center]]		[[File:KAmodLSM303C_obrys_int.png\|none\|400px\|thumb\|center]]
	</center>		</center>

Line 121:		Line 121:
	The KAmodLSM303C module has the option of choosing a communication bus between I2C and SPI. The selection of the active bus is done by soldering the jumper in the right place in the form of a 0R resistor on the board. By default, the module is configured for communication via the I2C bus.		The KAmodLSM303C module has the option of choosing a communication bus between I2C and SPI. The selection of the active bus is done by soldering the jumper in the right place in the form of a 0R resistor on the board. By default, the module is configured for communication via the I2C bus.
	<center>		<center>
	[[File:KAmodLSM303C_obrys_spi_i2c.png\|none\|~~200px~~\|thumb\|center]]		[[File:KAmodLSM303C_obrys_spi_i2c.png\|none\|400px\|thumb\|center]]
	</center>		</center>

	===== Dimensions =====		===== Dimensions =====
	<center>		<center>
	[[File:KAmodLSM303C_wymiary_PCB.png\|none\|~~275px~~\|thumb\|center]]		[[File:KAmodLSM303C_wymiary_PCB.png\|none\|475px\|thumb\|center]]
	</center>		</center>

	===== External links =====		===== External links =====
	*[http://download.kamami.pl/....pdf Karta katalogowa układu KAmodLSM303C firmy STMicroelectronics]		*[http://download.kamami.pl/....pdf Karta katalogowa układu KAmodLSM303C firmy STMicroelectronics]

Wlodzimierzhepner: Created page with "jzpdf ====== Description ====== [https://kamami.pl/kamod-kamami/… KAmodLSM303C] is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital si..."

2019-10-07T12:10:33Z

Created page with "__jzpdf__ ====== Description ====== [https://kamami.pl/kamod-kamami/… KAmodLSM303C] is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital si..."

New page

__jzpdf__
====== Description ======
[https://kamami.pl/kamod-kamami/… KAmodLSM303C] is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes. Thanks to the programmable interrupt generator outputs, it is possible to wake up the microcontroller after detecting free fall or object movement. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector, allowing easy attachment of the module to development kits. Due to its small dimensions, the product can be used in many development projects, while the Pmod through connector allows the boards to be connected in series.

<center>
[[File:KAmodLSM303C_modul.png|none|400px|thumb|center]]
</center>

===== Basic features =====
* LSM303C system (accelerometer and MEMS magnetometer) from STMicroelectronics
** Accelerometer measuring range: ± 2 / ± 4 / ± 6 / ± 8 g
** Magnetometer measuring range: ± 16 Gauss
** 16 bit data output
** Sleep mode/low power mode
** Embedded temperature sensor
** Communication interface: SPI/I2C
** Programmable interrupt generators (with free fall, motion or magnetic field detection)
* Through connector compatible with the Pmod standard, allows for serial connection of Pmod I2C modules
* Connector compatible with the KAMAMI standard
* Embedded jumpers enabling pull-up on I2C bus lines
* Embedded jumper connecting the INT line of the system to the INT line of the Pmod connectors
* Possibility of supply with voltage from 1.9 - 3.6 V through the Pmod connector and 1.9 - 5.5 V through the KAMAMI connector
* Mounting holes with a diameter of 2.5 mm
* Dimensions: 61.2 mm x 20.3 mm x 10 mm

===== Standard equipment =====
<center>
{| class="wikitable" style="width: 1000px;"
|-
! style="text-align: center;"|Code
! style="text-align: center;"|Description
|-
| style="text-align: center;"|<b>KAmodLSM303C</b>
| style="text-align: left;"|
*Assembled and launched module
|}
</center>

===== Schematic =====
<center>
[[File:KAmodLSM303C_schemat.png|none|600px|thumb|center]]
</center>

===== Output description - Pmod standard connector =====

<center>
{| class="wikitable" style="width: 1000px;"
|-
! style="text-align: center;" rowspan="10"| [[File:KAmodLSM303C_obrys_zlacze.png|center|150px]]
! style="text-align: center;"|JP1 (male connector)
! style="text-align: center;"|JP2 (female connector)
! style="text-align: center;"|I2C
! style="text-align: center;"|SPI 3-wire
|-
| style="text-align: center;"|VDD
| style="text-align: center;"|VDD
| rowspan="2" colspan="2" style="text-align: center;" |Power supply of module (max. 3.6 V)
|-
| style="text-align: center;"|GND
| style="text-align: center;"|GND
|-
| style="text-align: center;"|SDA
| style="text-align: center;"|SDA
| style="text-align: center;"|Data line of I2C bus
| style="text-align: center;"|Data line of SPI bus (SDI/SDO)
|-
| style="text-align: center;"|SCL
| style="text-align: center;"|SCL
| style="text-align: center;"| Clock line of I2C bus
| style="text-align: center;"| Clock line of SPI bus (SPC)
|-
| style="text-align: center;"|RST
| style="text-align: center;"|RST
| colspan="2" style="text-align: center;"| -
|-
| style="text-align: center;"|INT
| style="text-align: center;"|INT
| colspan="2" style="text-align: center;"|INT_MAG/INT_XL interrupt
|}
</center>

===== Output description – KAMAMI standard connector =====

<center>
{| class="wikitable" style="width: 1000px;"
|-
! style="text-align: center;" rowspan="10"| [[File:KAmodLSM303C_obrys_zlacza_kamami.png|center|150px]]
! style="text-align: center;"|Pin number
! style="text-align: center;"|I2C
! style="text-align: center;"|SPI 3-wire
|-
| style="text-align: center;"|1 (VDD_5V)
| colspan="2" style="text-align: center;" |Power supply of module (max. 5.5 V)
|-
| style="text-align: center;"|2 (SCL)
| style="text-align: center;"|Clock line of I2C bus
| style="text-align: center;"|Clock line of SPI bus (SPC)
|-
| style="text-align: center;"|3 (SDA)
| style="text-align: center;"|Data line of I2C bus
| style="text-align: center;"|Data line of SPI bus (SDI/SDO)
|-
| style="text-align: center;"|4 (GND)
| colspan="2" style="text-align: center;"| Ground
|}
</center>

====== I2C bus lines ======
The KAmodLSM303C module is equipped with jumpers enabling the connection of pull-up resistors to the VCC power pole to the I2C bus line. The jumpers give the possibility of independent enabled of the pull-up for the SDA and SCL lines.
<center>
[[File:KAmodLSM303C_obrys_i2c.png|none|200px|thumb|center]]
</center>

====== INT interrupt line ======
The KAmodLSM303C module is equipped with a jumper to connect the INT_XL or INT_MAG interrupt output line to the connector compatible with the Pmod standard. Thanks to the ability to disconnect the KAmodLSM303C interrupt line from the Pmod connectors, the user does not have to worry about the consequences of any conflicts arising from connecting modules compatible with Pmod with different logic states.
<center>
[[File:KAmodLSM303C_obrys_int.png|none|200px|thumb|center]]
</center>

====== Selection of communication bus ======
The KAmodLSM303C module has the option of choosing a communication bus between I2C and SPI. The selection of the active bus is done by soldering the jumper in the right place in the form of a 0R resistor on the board. By default, the module is configured for communication via the I2C bus.
<center>
[[File:KAmodLSM303C_obrys_spi_i2c.png|none|200px|thumb|center]]
</center>

===== Dimensions =====
<center>
[[File:KAmodLSM303C_wymiary_PCB.png|none|275px|thumb|center]]
</center>

===== External links =====
*[http://download.kamami.pl/....pdf Karta katalogowa układu KAmodLSM303C firmy STMicroelectronics]