KAmodTEM - Revision history

Grzegorzbecker: /* Board Layout */

2024-11-02T09:07:05Z

Board Layout

← Older revision		Revision as of 09:07, 2 November 2024
Line 48:		Line 48:
	===== Board Layout =====		===== Board Layout =====
	<center>		<center>
	[[File:KAmodTEM_pcb.png~~\|none~~\|400px\|~~thumb\|center~~]]		[[File:KAmodTEM_pcb.png\|400px]]
			[[File:KAmodTEM 02.jpg\|600px]]
	</center>		</center>


	===== Connectors =====		===== Connectors =====

Grzegorzbecker: /* Description */

2024-11-02T09:05:40Z

Description

← Older revision		Revision as of 09:05, 2 November 2024
Line 4:		Line 4:

	<center>		<center>
	[[File:kamodtem.jpg\|none\|~~400px~~\|thumb\|center]]		[[File:kamodtem.jpg\|none\|600px\|thumb\|center]]
	</center>		</center>

Grzegorzbecker: /* Description */

2024-11-02T09:03:41Z

Description

← Older revision		Revision as of 09:03, 2 November 2024
Line 1:		Line 1:
	__jzpdf__		__jzpdf__
	====== Description ======		====== Description ======
	KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.		[https://kamami.pl/en/temperature-sensors/102922-kamodtem-5906623432288.html KAmodTEM] makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.

	<center>		<center>
	[[File:kamodtem.jpg\|none\|400px\|thumb\|center]]		[[File:kamodtem.jpg\|none\|400px\|thumb\|center]]
	</center>		</center>


	===== Basic features =====		===== Basic features =====

Grzegorzbecker at 09:02, 2 November 2024

2024-11-02T09:02:02Z

← Older revision		Revision as of 09:02, 2 November 2024
Line 1:		Line 1:
	~~__jzXpdf__~~		__jzpdf__
	===== Description =====		====== Description ======
	KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.		KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.

Admin: Text replacement - "jzpdf" to "jzXpdf"

2024-10-30T00:06:26Z

Text replacement - "__jzpdf__" to "__jzXpdf__"

← Older revision		Revision as of 00:06, 30 October 2024
Line 1:		Line 1:
	~~__jzpdf__~~		__jzXpdf__
	===== Description =====		===== Description =====
	KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.		KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.

Anna Kubacka at 07:53, 24 September 2020

2020-09-24T07:53:37Z

← Older revision		Revision as of 07:53, 24 September 2020
Line 6:		Line 6:
	[[File:kamodtem.jpg\|none\|400px\|thumb\|center]]		[[File:kamodtem.jpg\|none\|400px\|thumb\|center]]
	</center>		</center>


	===== Basic features =====		===== Basic features =====

Admin: Text replacement - "jzXpdf" to "jzpdf"

2018-08-10T07:17:13Z

Text replacement - "__jzXpdf__" to "__jzpdf__"

← Older revision		Revision as of 07:17, 10 August 2018
Line 1:		Line 1:
	~~__jzXpdf__~~		__jzpdf__
	===== Description =====		===== Description =====
	KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.		KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.

Admin: Text replacement - "jzpdf" to "jzXpdf"

2018-08-10T07:16:32Z

Text replacement - "__jzpdf__" to "__jzXpdf__"

← Older revision		Revision as of 07:16, 10 August 2018
Line 1:		Line 1:
	~~__jzpdf__~~		__jzXpdf__
	===== Description =====		===== Description =====
	KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.		KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.

Wlodzimierzhepner: /* Alert output */

2018-07-26T14:22:21Z

Alert output

← Older revision		Revision as of 14:22, 26 July 2018
Line 79:		Line 79:


	===== Module usage		===== Module usage =====
	KAmodTEM is equipped with Con1 i Con2 connectors, that can be used to connect module to KAMAMI evaluation boards with I2C connector (STM32Butterfly, ZL30ARM, ZL15AVR, ZL16AVR, ZL5PIC etc.).		KAmodTEM is equipped with Con1 i Con2 connectors, that can be used to connect module to KAMAMI evaluation boards with I2C connector (STM32Butterfly, ZL30ARM, ZL15AVR, ZL16AVR, ZL5PIC etc.).

Anna Kubacka: Created page with "jzpdf ===== Description ===== KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat. Fil..."

2018-07-23T13:21:51Z

Created page with "__jzpdf__ ===== Description ===== KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat. <center> Fil..."

New page

__jzpdf__
===== Description =====
KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat.

<center>
[[File:kamodtem.jpg|none|400px|thumb|center]]
</center>

===== Basic features =====
* MCP9801 thermal sensor by Microchip
* Programmable sensor resolution: 9 to 12 bits
* Sampling frequency 4...33Hz
* Capable of reading temperatures from –55 to +125°C
* SMbus and I2C/400kHz interfaces
* 3 configurable address lines (up to 8 modules on one I2C bus)
* Address 1001xxx (xxx – A2/A1/A0 configurable by jumpers, default 000)
* Alert output (thermostat, open-drain)
* Supply voltage 2.7...5.5VDC
* Built-in pull-up resistors for I2C
* Built-in LED (for example can be used as alert indicator)
* I2C Kamami standard connector (compatible with most of Kamami evaluation boards)

===== Standard equipment =====

<center>
{| class="wikitable" style="width: 1000px;"
|-
! style="text-align: center;"|Code
! style="text-align: center;"|Description
|-
| style="text-align: center;"|<b>KAmodTEM</b>
| style="text-align: left;"|
* Assembled module
|}
</center>

===== Schematics =====

<center>
[[File:KAmodTEM_sch.png|none|400px|thumb|center]]
</center>

===== Board Layout =====
<center>
[[File:KAmodTEM_pcb.png|none|400px|thumb|center]]
</center>

===== Connectors =====
I2C bus (both lines with pull-up resistors) is available on Con1, Con2 and Con3 connectors. Pinout is shown on figure below.

<center>
[[File:KAmodTEM_1.png|none|400px|thumb|center]]
</center>

===== Address Lines =====
Address lines (A2, A1, A0) are connected to Con4 pin header. Lines are pulled-down, so default module address is 1001000. You can change it by putting jumpers on Con4.

<center>
[[File:KAmodTEM_2.png|none|400px|thumb|center]]
</center>

===== Alert output =====
Thermostat output of MCP9801 is connected to Con4 connector. It is open-drain output, so module is equipped qith pull-up resistor, which can be connected to AL line by PU jumper, AL output can be also used to control LED.

<center>
[[File:KAmodTEM_3.png|none|400px|thumb|center]]
</center>

===== Module usage
KAmodTEM is equipped with Con1 i Con2 connectors, that can be used to connect module to KAMAMI evaluation boards with I2C connector (STM32Butterfly, ZL30ARM, ZL15AVR, ZL16AVR, ZL5PIC etc.).

<center>
[[File:kamod_polaczenie_kamodtem.jpg|none|400px|thumb|center]]
</center>

KAmodTEM - Revision history

Grzegorzbecker: /* Board Layout */

Grzegorzbecker: /* Description */

Grzegorzbecker: /* Description */

Grzegorzbecker at 09:02, 2 November 2024

Admin: Text replacement - "__jzpdf__" to "__jzXpdf__"

Anna Kubacka at 07:53, 24 September 2020

Admin: Text replacement - "__jzXpdf__" to "__jzpdf__"

Admin: Text replacement - "__jzpdf__" to "__jzXpdf__"

Wlodzimierzhepner: /* Alert output */

Anna Kubacka: Created page with "__jzpdf__ ===== Description ===== KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat. Fil..."

Admin: Text replacement - "jzpdf" to "jzXpdf"

Admin: Text replacement - "jzXpdf" to "jzpdf"

Admin: Text replacement - "jzpdf" to "jzXpdf"

Anna Kubacka: Created page with "jzpdf ===== Description ===== KAmodTEM makes it easy to use thermal sensor with any device equipped with I2C interface, it can also be used as thermostat. Fil..."