KAmodTXS0108 - Revision history

Grzegorzbecker: /* Connection */

2025-03-01T16:15:33Z

Connection

← Older revision		Revision as of 16:15, 1 March 2025
Line 40:		Line 40:
	'''Ground:''' Both devices and the converter must have a common ground, so the ground wire should be connected to the pin marked as GND.<br>		'''Ground:''' Both devices and the converter must have a common ground, so the ground wire should be connected to the pin marked as GND.<br>
	'''Logical signals:''' Signals should be connected to the appropriate connectors. Signals with a higher voltage should be connected to the Bx connectors, and signals with a lower voltage to the Ax connectors. <center>		'''Logical signals:''' Signals should be connected to the appropriate connectors. Signals with a higher voltage should be connected to the Bx connectors, and signals with a lower voltage to the Ax connectors. <center>
	[[File:~~KAmodTXS0108_conn_en~~.~~jpg~~\|none\|1200px\|thumb\|center]]		[[File:KAmodTXS0108_conn_EN.png\|none\|1200px\|thumb\|center]]

	</center>		</center>

Grzegorzbecker: /* External links */

2025-03-01T16:12:29Z

External links

← Older revision		Revision as of 16:12, 1 March 2025
Line 53:		Line 53:

	===== External links =====		===== External links =====
	*[https://wiki.kamamilabs.com/images/e/e0/Txs0108e.pdf Texas Instruments TXS108EPW ~~datasheet~~]		*[https://download.kamami.pl/p581753-txs0108%20zastosowania.pdf TXS0108 Guide and Applications]
			*[https://wiki.kamamilabs.com/images/e/e0/Txs0108e.pdf Texas Instruments TXS108EPW Datasheet]

Grzegorzbecker: /* Dimensions */

2025-03-01T16:12:09Z

Dimensions

← Older revision		Revision as of 16:12, 1 March 2025
Line 50:		Line 50:

	</center>		</center>
			<br><br>

	===== External links =====		===== External links =====
	*[https://wiki.kamamilabs.com/images/e/e0/Txs0108e.pdf Texas Instruments TXS108EPW datasheet]		*[https://wiki.kamamilabs.com/images/e/e0/Txs0108e.pdf Texas Instruments TXS108EPW datasheet]

Grzegorzbecker: /* Connection */

2025-03-01T16:12:00Z

Connection

← Older revision		Revision as of 16:12, 1 March 2025
Line 37:		Line 37:
	</center>		</center>
	===== Connection =====		===== Connection =====
	'''Power supply:''' The converter requires power from two different sources. The higher voltage (from 1.7 V to 5.5 V) should be connected to the pin marked as VCC_B, and the lower voltage (from 1.4 V to 3.6 V) should be connected to VCC_A.<br>		'''Power supply:''' The converter requires power from two different sources. The higher voltage (from 1.7 V to 5.5 V) should be connected to the pin marked as VCC_B, and the lower voltage (from 1.2 V to 3.6 V) should be connected to VCC_A.<br>
	'''Ground:''' Both devices and the converter must have a common ground, so the ground wire should be connected to the pin marked as GND.<br>		'''Ground:''' Both devices and the converter must have a common ground, so the ground wire should be connected to the pin marked as GND.<br>
	'''Logical signals:''' Signals should be connected to the appropriate connectors. Signals with a higher voltage should be connected to the Bx connectors, and signals with a lower voltage to the Ax connectors. <center>		'''Logical signals:''' Signals should be connected to the appropriate connectors. Signals with a higher voltage should be connected to the Bx connectors, and signals with a lower voltage to the Ax connectors. <center>
Line 43:		Line 43:

	</center>		</center>
			<br><br>

	===== Dimensions =====		===== Dimensions =====

Grzegorzbecker: /* Standard Equipment */

2025-03-01T16:11:41Z

Standard Equipment

← Older revision		Revision as of 16:11, 1 March 2025
Line 30:		Line 30:
	\|}		\|}
	</center>		</center>
			<br><br>

	===== Schematic =====		===== Schematic =====

Grzegorzbecker: /* Basic Features */

2025-03-01T16:11:35Z

Basic Features

← Older revision		Revision as of 16:11, 1 March 2025
Line 16:		Line 16:
	**VCCA < VCCB		**VCCA < VCCB
	*Dimensions: 16 x 29 mm		*Dimensions: 16 x 29 mm
			<br><br>

	===== Standard Equipment =====		===== Standard Equipment =====

Grzegorzbecker: /* Standard Equipment */

2025-03-01T16:11:17Z

Standard Equipment

← Older revision		Revision as of 16:11, 1 March 2025
Line 26:		Line 26:
	\| style="text-align: center;"\|<b>KAmodTXS0108</b>		\| style="text-align: center;"\|<b>KAmodTXS0108</b>
	\| style="text-align: left;"\|		\| style="text-align: left;"\|
	*Assembled and ~~powered-up~~ module		*Assembled and tested module
	\|}		\|}
	</center>		</center>

	===== Schematic =====		===== Schematic =====
	<center>		<center>

Grzegorzbecker: /* Basic Features */

2025-03-01T16:10:46Z

Basic Features

← Older revision		Revision as of 16:10, 1 March 2025
Line 12:		Line 12:
	*Level Shift: Bidirectional		*Level Shift: Bidirectional
	*Power Supply:		*Power Supply:
	**VCCA from 1.4 V to +3.6 V,		**VCCA from 1.2 V to +3.6 V,
	**VCCB from 1.7 V to +5.5 V,		**VCCB from 1.7 V to +5.5 V,
	**VCCA < VCCB		**VCCA < VCCB
	*Dimensions: 16 x 29 mm		*Dimensions: 16 x 29 mm

	===== Standard Equipment =====		===== Standard Equipment =====
	<center>		<center>

Grzegorzbecker: /* Description */

2025-03-01T16:07:59Z

Description

← Older revision		Revision as of 16:07, 1 March 2025
Line 1:		Line 1:
	__jzpdf__		__jzpdf__
	====== Description ======		====== Description ======
	[https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html ~~KAmodTXx0108~~] is a module with the TXS0108~~/TXB0108~~ system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many development projects.		[https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html KAmodTXS0108] is a module with the TXS0108 system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many development projects.

	<center>		<center>

Grzegorzbecker: Created page with "jzpdf ====== Description ====== [https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html KAmodTXx0108] is a module with the TXS0108/TXB0108 system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many developme..."

2025-02-28T16:59:37Z

Created page with "__jzpdf__ ====== Description ====== [https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html KAmodTXx0108] is a module with the TXS0108/TXB0108 system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many developme..."

New page

__jzpdf__
====== Description ======
[https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html KAmodTXx0108] is a module with the TXS0108/TXB0108 system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many development projects.

<center>
[[File:KamodtTXS0108.jpg|none|800px|thumb|center]]
</center>

===== Basic Features =====
*Texas Instruments TXS0108E
*8 Channels
*Level Shift: Bidirectional
*Power Supply:
**VCCA from 1.4 V to +3.6 V,
**VCCB from 1.7 V to +5.5 V,
**VCCA < VCCB
*Dimensions: 16 x 29 mm
===== Standard Equipment =====
<center>
{| class="wikitable" style="width: 1000px;"
|-
! style="text-align: center;"|Code
! style="text-align: center;"|Description
|-
| style="text-align: center;"|<b>KAmodTXS0108</b>
| style="text-align: left;"|
*Assembled and powered-up module
|}
</center>
===== Schematic =====
<center>
[[File:KAmodTXS0108_sch.jpg|none|550px|thumb|center]]
</center>
===== Connection =====
'''Power supply:''' The converter requires power from two different sources. The higher voltage (from 1.7 V to 5.5 V) should be connected to the pin marked as VCC_B, and the lower voltage (from 1.4 V to 3.6 V) should be connected to VCC_A.<br>
'''Ground:''' Both devices and the converter must have a common ground, so the ground wire should be connected to the pin marked as GND.<br>
'''Logical signals:''' Signals should be connected to the appropriate connectors. Signals with a higher voltage should be connected to the Bx connectors, and signals with a lower voltage to the Ax connectors. <center>
[[File:KAmodTXS0108_conn_en.jpg|none|1200px|thumb|center]]

</center>

===== Dimensions =====
<center>
[[File:KAmodTXS0108_wym.png|none|300px|thumb|center]]

</center>

===== External links =====
*[https://wiki.kamamilabs.com/images/e/e0/Txs0108e.pdf Texas Instruments TXS108EPW datasheet]