KAmodVL6180X - Revision history

Grzegorzbecker at 09:26, 2 November 2024

2024-11-02T09:26:20Z

← Older revision		Revision as of 09:26, 2 November 2024
Line 1:		Line 1:
	~~__jzXpdf__~~		__jzpdf__
	====== Description ======		====== Description ======
	[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.		[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.

Admin: Text replacement - "jzpdf" to "jzXpdf"

2024-10-29T20:39:59Z

Text replacement - "__jzpdf__" to "__jzXpdf__"

← Older revision		Revision as of 20:39, 29 October 2024
Line 1:		Line 1:
	~~__jzpdf__~~		__jzXpdf__
	====== Description ======		====== Description ======
	[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.		[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.

Anna Kubacka at 08:29, 24 September 2020

2020-09-24T08:29:26Z

← Older revision		Revision as of 08:29, 24 September 2020
Line 2:		Line 2:
	====== Description ======		====== Description ======
	[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.		[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.

	<center>		<center>
	[[File:KAmodVL6180X_moduł.png\|none\|400px\|thumb\|center]]		[[File:KAmodVL6180X_moduł.png\|none\|400px\|thumb\|center]]

Admin: Text replacement - "jzXpdf" to "jzpdf"

2018-08-10T07:17:13Z

Text replacement - "__jzXpdf__" to "__jzpdf__"

← Older revision		Revision as of 07:17, 10 August 2018
Line 1:		Line 1:
	~~__jzXpdf__~~		__jzpdf__
	====== Description ======		====== Description ======
	[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.		[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.

Admin: Text replacement - "jzpdf" to "jzXpdf"

2018-08-10T07:16:33Z

Text replacement - "__jzpdf__" to "__jzXpdf__"

← Older revision		Revision as of 07:16, 10 August 2018
Line 1:		Line 1:
	~~__jzpdf__~~		__jzXpdf__
	====== Description ======		====== Description ======
	[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.		[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.

Admin: /* Description */

2018-07-05T19:26:58Z

Description

← Older revision		Revision as of 19:26, 5 July 2018
Line 4:		Line 4:

	<center>		<center>
	[[File:~~KAmodVL6180X moduł~~.png\|none\|400px\|thumb\|center]]		[[File:KAmodVL6180X_moduł.png\|none\|400px\|thumb\|center]]
	</center>		</center>

Anna Kubacka at 19:22, 5 July 2018

2018-07-05T19:22:54Z

← Older revision		Revision as of 19:22, 5 July 2018
Line 1:		Line 1:
	__jzpdf__		__jzpdf__
	====== ~~Opis~~ ======		====== Description ======
	[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] to ~~moduł pozwalający na pomiar natężenia oświetlenia~~ (ALS), ~~odległości od obiektu oraz rozpoznawanie gestów~~. ~~Ma wbudowany stabilizator napięcia oraz translatory poziomów na liniach sygnałowych, dzięki czemu może być wykorzystany w systemach zasilanych napięciem~~ 2~~,8 V -~~ 5~~,5 V~~.		[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8V – 5.5V power supply voltage.

	<center>		<center>
	[[File:~~KAmodVL6180X_moduł~~.png\|none\|400px\|thumb\|center]]		[[File:KAmodVL6180X moduł.png\|none\|400px\|thumb\|center]]
	</center>		</center>

	===== ~~Podstawowe cechy i parametry~~ =====		===== Basic features and parameters =====
	*~~Układ~~ VL6180X ~~firmy~~ STMicroelectronics		*Chip VL6180X from STMicroelectronics
	*~~Możliwość pomiaru odległości w zakresie od~~ 0 ~~do 100 mm~~		*Distance measurement possibility in range from 0 to 100mm
	*~~Możliwość pomiaru natężenia oświetlenia w zakresie od~~ 1 do 100.000 ~~Luxów~~		*Possibility of light intensity measurement in range from 1 to 100.000 Lux
	*~~Napięcie zasilania~~: 2,8 - 5~~,5 V~~		*Power supply voltage: 2.8 – 5.5V
	*~~Obsługiwany przy pomocy magistrali~~ I2C		*Ocommunication interface: I2C
	*~~Dwie linie~~ GPIO		*Two GPIO lines
	*~~Wbudowany stabilizator napięcia oraz translatory poziomów sygnałów~~		*Embedded voltage regulator and voltage level translators on signal lines
	*~~Otwory do przylutowania złącza szpilkowego~~		*Holes for pin connector soldering
	*~~Otwory montażowe o średnicy 3 mm~~		*Mounting holes 3mm
	*~~Wymiary modułu~~ (~~bez złącza~~): ~~24 mm~~ x ~~16 mm~~ x ~~3 mm~~		*Module size (without connector): 24mm x 16mm x 3mm
	===== ~~Wyposażenie standardowe~~ =====		===== Standard equipment =====
	<center>		<center>
	{\| class="wikitable" style="width: 1000px;"		{\| class="wikitable" style="width: 1000px;"
	\|-		\|-
	! style="text-align: center;"\|~~Kod~~		! style="text-align: center;"\|Code
	! style="text-align: center;"\|~~Opis~~		! style="text-align: center;"\|Description
	\|-		\|-
	\| style="text-align: center;"\|<b>KAmodVL6180X</b>		\| style="text-align: center;"\|<b>KAmodVL6180X</b>
	\| style="text-align: ~~center~~;"\|		\| style="text-align: left;"\|
	*~~Zmontowany i uruchomiony moduł~~		*Assembled and launched module
	*~~Złącze szpilkowe~~ (~~męskie proste oraz kątowe~~) ~~do wlutowania~~		*Pin connector (male and angle) for soldering
	\|}		\|}
	</center>		</center>

	===== ~~Schemat elektryczny~~ =====		===== Electrical schematic =====
	<center>		<center>
	[[File:KAmodVL6180X_schemat.png\|none\|800px\|thumb\|center]]		[[File:KAmodVL6180X_schemat.png\|none\|800px\|thumb\|center]]
	</center>		</center>
	===== ~~Opis wyprowadzeń~~ =====		===== Output description=====

	<center>		<center>
Line 43:		Line 43:
	! style="text-align: center;" rowspan="10"\| [[File:KAmodVL6180 obrys PCB.png\|center\|200px]]		! style="text-align: center;" rowspan="10"\| [[File:KAmodVL6180 obrys PCB.png\|center\|200px]]
	! style="text-align: center;"\|JP1		! style="text-align: center;"\|JP1
	! style="text-align: center;"\|~~Funkcja~~		! style="text-align: center;"\|Function

	\|-		\|-
	\| style="text-align: center;"\|GND		\| style="text-align: center;"\|GND
	\| rowspan="2" colspan="1" style="text-align: center;" \|~~Zasilanie modułu~~		\| rowspan="2" colspan="1" style="text-align: center;" \|Module power supply
	\|-		\|-
	\| style="text-align: center;"\|+VIN		\| style="text-align: center;"\|+VIN
	\|-		\|-
	\| style="text-align: center;"\|SDA		\| style="text-align: center;"\|SDA
	\| style="text-align: center;"\|~~Linia danych~~ I2C		\| style="text-align: center;"\|I2C Data line
	\|-		\|-
	\| style="text-align: center;"\|SCL		\| style="text-align: center;"\|SCL
	\| style="text-align: center;"\|~~Linia taktująca~~ I2C		\| style="text-align: center;"\|I2C Clock line
	\|-		\|-
	\| style="text-align: center;"\|IO0		\| style="text-align: center;"\|IO0
	\| style="text-align: center;"\|~~Linia~~ Chip Enable/GPIO		\| style="text-align: center;"\|Chip Enable/GPIO line
	\|-		\|-
	\| style="text-align: center;"\|IO1		\| style="text-align: center;"\|IO1
	\| style="text-align: center;"\|~~Linia~~ GPIO1		\| style="text-align: center;"\|GPIO1 line
	\|}		\|}
	</center>		</center>
	===== ~~Linki zewnętrzne~~ =====		===== External links =====
	*[http://download.kamami.pl/p559362-en.DM00112632.pdf ~~Karta katalogowa układu~~ VL6180X]		*[http://download.kamami.pl/p559362-en.DM00112632.pdf VL6180X chip datasheet]
	*[http://mikrokontroler.pl/2016/11/15/projekt-kamodvl6180x-kamduino-uno ~~Artykuł~~ <nowiki>"[PROJEKT] KAmodVL6180X i KAmduino UNO"</nowiki>]		*[http://mikrokontroler.pl/2016/11/15/projekt-kamodvl6180x-kamduino-uno Article <nowiki>"[PROJEKT] KAmodVL6180X i KAmduino UNO"</nowiki>]

	~~[[Kategoria:Moduły peryferyjne KAmod (Kamami)]]~~
	~~[[Kategoria:Zawartość]~~]

Admin at 18:12, 5 July 2018

2018-07-05T18:12:19Z

← Older revision		Revision as of 18:12, 5 July 2018
Line 4:		Line 4:

	<center>		<center>
	[[File:~~KAmodVL6180X moduł~~.png\|none\|400px\|thumb\|center]]		[[File:KAmodVL6180X_moduł.png\|none\|400px\|thumb\|center]]
	</center>		</center>

Admin: Text replacement - "[[Plik:" to "[[File:"

2018-07-05T17:50:22Z

Text replacement - "[[Plik:" to "[[File:"

← Older revision		Revision as of 17:50, 5 July 2018
Line 4:		Line 4:

	<center>		<center>
	[[~~Plik~~:KAmodVL6180X moduł.png\|none\|400px\|thumb\|center]]		[[File:KAmodVL6180X moduł.png\|none\|400px\|thumb\|center]]
	</center>		</center>

Line 34:		Line 34:
	===== Schemat elektryczny =====		===== Schemat elektryczny =====
	<center>		<center>
	[[~~Plik~~:KAmodVL6180X_schemat.png\|none\|800px\|thumb\|center]]		[[File:KAmodVL6180X_schemat.png\|none\|800px\|thumb\|center]]
	</center>		</center>
	===== Opis wyprowadzeń =====		===== Opis wyprowadzeń =====
Line 41:		Line 41:
	{\| class="wikitable" style="width: 1000px;"		{\| class="wikitable" style="width: 1000px;"
	\|-		\|-
	! style="text-align: center;" rowspan="10"\| [[~~Plik~~:KAmodVL6180 obrys PCB.png\|center\|200px]]		! style="text-align: center;" rowspan="10"\| [[File:KAmodVL6180 obrys PCB.png\|center\|200px]]
	! style="text-align: center;"\|JP1		! style="text-align: center;"\|JP1
	! style="text-align: center;"\|Funkcja		! style="text-align: center;"\|Funkcja

Wlodzimierzhepner at 11:40, 11 August 2017

2017-08-11T11:40:07Z

← Older revision		Revision as of 11:40, 11 August 2017
Line 1:		Line 1:
			__jzpdf__
	====== Opis ======		====== Opis ======
	[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] to moduł pozwalający na pomiar natężenia oświetlenia (ALS), odległości od obiektu oraz rozpoznawanie gestów. Ma wbudowany stabilizator napięcia oraz translatory poziomów na liniach sygnałowych, dzięki czemu może być wykorzystany w systemach zasilanych napięciem 2,8 V - 5,5 V.		[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodVL6180X] to moduł pozwalający na pomiar natężenia oświetlenia (ALS), odległości od obiektu oraz rozpoznawanie gestów. Ma wbudowany stabilizator napięcia oraz translatory poziomów na liniach sygnałowych, dzięki czemu może być wykorzystany w systemach zasilanych napięciem 2,8 V - 5,5 V.

KAmodVL6180X - Revision history

Grzegorzbecker at 09:26, 2 November 2024

Admin: Text replacement - "__jzpdf__" to "__jzXpdf__"

Anna Kubacka at 08:29, 24 September 2020

Admin: Text replacement - "__jzXpdf__" to "__jzpdf__"

Admin: Text replacement - "__jzpdf__" to "__jzXpdf__"

Admin: /* Description */

Anna Kubacka at 19:22, 5 July 2018

Admin at 18:12, 5 July 2018

Admin: Text replacement - "[[Plik:" to "[[File:"

Wlodzimierzhepner at 11:40, 11 August 2017

Admin: Text replacement - "jzpdf" to "jzXpdf"

Admin: Text replacement - "jzXpdf" to "jzpdf"

Admin: Text replacement - "jzpdf" to "jzXpdf"