KAmod DCDC AP63200 - Revision history

Grzegorzbecker: Created page with "jzpdf ====== Description ====== KAmod DCDC AP63200 - Miniature switching voltage regulator based on the AP63200 chip
KAmod DCDC AP63200 is a compact switching regulator module. With small dimensions of 18x11 mm, it can operate with an input voltage of up to 32 V and an output load of up to 1.5 A. The module is available in several versions with precisely set output voltages. Available variants include: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, and 15 V.

2026-04-04T12:39:13Z

Created page with "jzpdf ====== Description ====== <b>KAmod DCDC AP63200 - Miniature switching voltage regulator based on the AP63200 chip</b><br> KAmod DCDC AP63200 is a compact switching regulator module. With small dimensions of 18x11 mm, it can operate with an input voltage of up to 32 V and an output load of up to 1.5 A. The module is available in several versions with precisely set output voltages. Available variants include: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, and 15 V.<br><b..."

New page
jzpdf
====== Description ======
<b>KAmod DCDC AP63200 - Miniature switching voltage regulator based on the AP63200 chip</b><br>
KAmod DCDC AP63200 is a compact switching regulator module. With small dimensions of 18x11 mm, it can operate with an input voltage of up to 32 V and an output load of up to 1.5 A. The module is available in several versions with precisely set output voltages. Available variants include: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, and 15 V.<br><br>
<center>
[[File:KAmod_DCDC_AP63200_1.jpg|800px]]
</center>
<br>

<hr>

===== Basic Parameters =====
* Input voltage range: 3.5…32 V
* Maximum continuous output current: 1 A
* Maximum peak output current: 1.5 A (duration depends on thermal conditions)
* Available with output voltages: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, or 15 V
* Switching regulator type: AP63200
* DC/DC converter operating frequency: 500 kHz
* Efficiency: approx. 90% at 1 A load
* Protection against overvoltage, overload, and overheating
* Compact dimensions: 18x11 mm
* Input voltage should be at least 1 V higher than the expected output voltage
<hr>

===== Standard Equipment =====
<center>
{| class="wikitable" style="width: 1000px;"
|-
! style="text-align: center;"|Code
! style="text-align: center;"|Description
|-
| style="text-align: center;"|<b>KAmod DCDC AP63200</b>
| style="text-align: left;"|
* Assembled and tested module
|}
</center>

<hr>
===== Connection Diagram =====
There are pads with holes on the edges of the module board, arranged according to a 2.54 mm pitch. Goldpin headers or wires can be soldered to them. The power input (WEJ) and output (WYJ) each have 2 pads located on opposite ends of the board, allowing the module to be optimally fitted to the target application.
<center>
[[File:KAmod_DCDC_AP63200_CON.png|none|500px|thumb|center]]
</center>

<hr>
===== Output Voltage =====
The KAmod DCDC AP63200 module is available with a strictly defined output voltage. Variants include: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, or 15 V. The version designation is located on the bottom of the PCB. A marker is placed next to the corresponding voltage—for example, for a 15 V module, the marker will appear as shown in the figure:
<center>
[[File:KAmod_DCDC_AP63200_SEL.png|none|400px|thumb|center]]
</center>

<hr>
===== Dimensions =====
The exact dimensions of the module are 17.8x10.7 mm. There are pads with holes on the edges of the module board, arranged according to a 2.54 mm pitch.
<center>
[[File:KAmod_DCDC_AP63200_wym.png|none|500px|thumb|center]]
</center>

<hr>
===== Links =====
[https://wiki.kamamilabs.com/images/8/85/AP63200.pdf AP63200 Datasheet]
[https://wiki.kamamilabs.com/images/0/07/KAmod-DCDC-AP63200_3d.zip CAD Model (STEP)]