<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://wiki.kamamilabs.com/index.php?action=history&amp;feed=atom&amp;title=KAmod_USB-UART-mini</id>
	<title>KAmod USB-UART-mini - Revision history</title>
	<link rel="self" type="application/atom+xml" href="https://wiki.kamamilabs.com/index.php?action=history&amp;feed=atom&amp;title=KAmod_USB-UART-mini"/>
	<link rel="alternate" type="text/html" href="https://wiki.kamamilabs.com/index.php?title=KAmod_USB-UART-mini&amp;action=history"/>
	<updated>2026-04-24T16:33:19Z</updated>
	<subtitle>Revision history for this page on the wiki</subtitle>
	<generator>MediaWiki 1.42.3</generator>
	<entry>
		<id>https://wiki.kamamilabs.com/index.php?title=KAmod_USB-UART-mini&amp;diff=4461&amp;oldid=prev</id>
		<title>Grzegorzbecker: /* Description */</title>
		<link rel="alternate" type="text/html" href="https://wiki.kamamilabs.com/index.php?title=KAmod_USB-UART-mini&amp;diff=4461&amp;oldid=prev"/>
		<updated>2024-10-26T16:25:22Z</updated>

		<summary type="html">&lt;p&gt;&lt;span dir=&quot;auto&quot;&gt;&lt;span class=&quot;autocomment&quot;&gt;Description&lt;/span&gt;&lt;/span&gt;&lt;/p&gt;
&lt;table style=&quot;background-color: #fff; color: #202122;&quot; data-mw=&quot;interface&quot;&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;col class=&quot;diff-marker&quot; /&gt;
				&lt;col class=&quot;diff-content&quot; /&gt;
				&lt;tr class=&quot;diff-title&quot; lang=&quot;en&quot;&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;← Older revision&lt;/td&gt;
				&lt;td colspan=&quot;2&quot; style=&quot;background-color: #fff; color: #202122; text-align: center;&quot;&gt;Revision as of 16:25, 26 October 2024&lt;/td&gt;
				&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot; id=&quot;mw-diff-left-l1&quot;&gt;Line 1:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;__jzpdf__&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;__jzpdf__&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;===== Description =====&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;===== Description =====&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;−&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;b&amp;gt;[https://kamami.pl/&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;konwertery&lt;/del&gt;-usb&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;--&lt;/del&gt;-uart&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;-&lt;/del&gt;-rs232/1190298-kamod-usb-uart-mini-&lt;del style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;miniaturowy-konwerter&lt;/del&gt;-usb-uart-5906623433421.html KAmod USB-UART-mini]&amp;lt;/b&amp;gt; is a USB-C interface converter to the UART serial interface with small dimensions - only 20.5x10.5 mm. The module is based on the FT230XS system and has only basic signal lines - RX and TX, which operate at a voltage of 3.3 V. Additionally, the module contains communication indicators in the form of miniature LEDs. Optionally, the converter can be equipped with a front panel, which allows easy and aesthetic mounting of the module on the wall of almost any housing.&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot; data-marker=&quot;+&quot;&gt;&lt;/td&gt;&lt;td style=&quot;color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;b&amp;gt;[https://kamami.pl/&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;en/converters&lt;/ins&gt;-usb-uart-rs232/1190298-kamod-usb-uart-mini-&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;miniature&lt;/ins&gt;-usb-uart&lt;ins style=&quot;font-weight: bold; text-decoration: none;&quot;&gt;-converter&lt;/ins&gt;-5906623433421.html KAmod USB-UART-mini]&amp;lt;/b&amp;gt; is a USB-C interface converter to the UART serial interface with small dimensions - only 20.5x10.5 mm. The module is based on the FT230XS system and has only basic signal lines - RX and TX, which operate at a voltage of 3.3 V. Additionally, the module contains communication indicators in the form of miniature LEDs. Optionally, the converter can be equipped with a front panel, which allows easy and aesthetic mounting of the module on the wall of almost any housing.&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;br&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;center&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;td class=&quot;diff-marker&quot;&gt;&lt;/td&gt;&lt;td style=&quot;background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;&quot;&gt;&lt;div&gt;&amp;lt;center&amp;gt;&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;/table&gt;</summary>
		<author><name>Grzegorzbecker</name></author>
	</entry>
	<entry>
		<id>https://wiki.kamamilabs.com/index.php?title=KAmod_USB-UART-mini&amp;diff=4460&amp;oldid=prev</id>
		<title>Grzegorzbecker: Created page with &quot;__jzpdf__ ===== Description ===== &lt;b&gt;[https://kamami.pl/konwertery-usb---uart--rs232/1190298-kamod-usb-uart-mini-miniaturowy-konwerter-usb-uart-5906623433421.html KAmod USB-UA...&quot;</title>
		<link rel="alternate" type="text/html" href="https://wiki.kamamilabs.com/index.php?title=KAmod_USB-UART-mini&amp;diff=4460&amp;oldid=prev"/>
		<updated>2024-10-26T16:24:54Z</updated>

		<summary type="html">&lt;p&gt;Created page with &amp;quot;__jzpdf__ ===== Description ===== &amp;lt;b&amp;gt;[https://kamami.pl/konwertery-usb---uart--rs232/1190298-kamod-usb-uart-mini-miniaturowy-konwerter-usb-uart-5906623433421.html KAmod USB-UA...&amp;quot;&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;__jzpdf__&lt;br /&gt;
===== Description =====&lt;br /&gt;
&amp;lt;b&amp;gt;[https://kamami.pl/konwertery-usb---uart--rs232/1190298-kamod-usb-uart-mini-miniaturowy-konwerter-usb-uart-5906623433421.html KAmod USB-UART-mini]&amp;lt;/b&amp;gt; is a USB-C interface converter to the UART serial interface with small dimensions - only 20.5x10.5 mm. The module is based on the FT230XS system and has only basic signal lines - RX and TX, which operate at a voltage of 3.3 V. Additionally, the module contains communication indicators in the form of miniature LEDs. Optionally, the converter can be equipped with a front panel, which allows easy and aesthetic mounting of the module on the wall of almost any housing.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmod_USB-UART-mini_3.jpg|430px]]&lt;br /&gt;
[[File:KAmod_USB-UART-mini_1.jpg|500px]]&lt;br /&gt;
&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&lt;br /&gt;
===== Basic parameters =====&lt;br /&gt;
* The converter is based on the FTDI FT230XS chip&lt;br /&gt;
* Compatible with USB 2.0 Full Speed&lt;br /&gt;
* Drivers for Windows/Linux/Mac systems&lt;br /&gt;
* On the USB interface side it contains a USB-C connector&lt;br /&gt;
* Contains only the basic UART interface signal lines - RX and TX&lt;br /&gt;
* 5 V power supply supplied to the USB connector&lt;br /&gt;
* The voltage level for serial interface signals is 3.3 V (tolerates 5 V voltage at the input)&lt;br /&gt;
* Optionally, the voltage level for serial interface signals can be set to 5 V&lt;br /&gt;
* Communication speed (bit rate): 300 bps...3 Mbps&lt;br /&gt;
* LEDs indicating communication&lt;br /&gt;
* Small board dimensions 20.5x10.5 mm, height approx. 7 mm&lt;br /&gt;
* Optionally, it can be equipped with a front panel, which allows easy and aesthetic installation of the module on the wall of almost any housing&lt;br /&gt;
&lt;br /&gt;
===== Standard equipment =====&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot; style=&amp;quot;width: 1000px;&amp;quot;&lt;br /&gt;
|-&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Code&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Description&lt;br /&gt;
|-&lt;br /&gt;
| style=&amp;quot;text-align: center;&amp;quot;|&amp;lt;b&amp;gt;KAmod USB-UART-mini&amp;lt;/b&amp;gt;&lt;br /&gt;
| style=&amp;quot;text-align: left;&amp;quot;|&lt;br /&gt;
* Assembled and started module&lt;br /&gt;
* Front panel (to be soldered)&lt;br /&gt;
* Straight goldpin male connector (to be soldered)&lt;br /&gt;
* Angled goldpin male connector (to be soldered)&lt;br /&gt;
|}&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&lt;br /&gt;
===== Electrical diagram =====&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmodUSB-UART-mini sch.jpg|none|1000px|thumb|center]]&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=====USB interface connector =====&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot; style=&amp;quot;width: 1000px;&amp;quot;&lt;br /&gt;
|-&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Connector&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Function&lt;br /&gt;
|-&lt;br /&gt;
| style=&amp;quot;text-align: center;&amp;quot;|&amp;lt;b&amp;gt;USB-C&amp;lt;/b&amp;gt;&lt;br /&gt;
| style=&amp;quot;text-align: left;&amp;quot;|&lt;br /&gt;
* It implements communication in the USB 2.0 Full Speed ​​standard&lt;br /&gt;
* It provides 5 V power&lt;br /&gt;
|}&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
The USB-C connector is small, but convenient to use and resistant to damage. Additionally, it allows for the conduction of significant currents and can be used in the latest generation of interfaces - USB 3.x. These features make USB-C replace the old standards of USB connectors in many applications, which is why KAmod USB-UART-mini has been equipped with a USB-C connector.&lt;br /&gt;
&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmodUSB-UART-mini_1.jpg|300px]]&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=====Serial interface connector =====&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot; style=&amp;quot;width: 1000px;&amp;quot;&lt;br /&gt;
|-&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Connector&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Function&lt;br /&gt;
|-&lt;br /&gt;
| style=&amp;quot;text-align: center;&amp;quot;|&amp;lt;b&amp;gt;RX, TX, 5V, GND&amp;lt;/b&amp;gt;&lt;br /&gt;
| style=&amp;quot;text-align: left;&amp;quot;|&lt;br /&gt;
* RX and TX signals of the serial UART interface are derived&lt;br /&gt;
* 5 V power supply connected to the USB connector&lt;br /&gt;
|}&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
The serial interface connector is adapted to mount goldpin pins with a pitch of 2.54 mm, but it also allows for soldering wires directly to the converter board. The signals derived on the connector are as follows:&lt;br /&gt;
:* &amp;lt;b&amp;gt;TX&amp;lt;/b&amp;gt; – data output from the serial UART interface;&lt;br /&gt;
:* &amp;lt;b&amp;gt;RX&amp;lt;/b&amp;gt; – data input to the UART interface;&lt;br /&gt;
:* &amp;lt;b&amp;gt;5V&amp;lt;/b&amp;gt; – power output with a value of approx. 5 V supplied to the USB connector;&lt;br /&gt;
:* &amp;lt;b&amp;gt;GND&amp;lt;/b&amp;gt; – power/signal ground.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmodUSB-UART-mini_2.jpg|360px]]&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=====Voltage level on UART interface lines =====&lt;br /&gt;
The RX and TX lines of the UART interface operate at a voltage of 3.3 V. Additionally, the RX input tolerates higher voltages, up to a maximum of 5 V.&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
Optionally, the module can be configured so that the RX and TX lines of the UART interface operate at a voltage of 5 V. Permanently shorting the pads located on the bottom of the board, marked &amp;quot;&amp;lt;b&amp;gt;Vio=5V&amp;lt;/b&amp;gt;&amp;quot;, with a drop of hot solder, will cause the interface to operate at a voltage of 5 V.&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmodUSB-UART-mini_3.jpg|300px]]&lt;br /&gt;
&lt;br /&gt;
[[File:KAmod_USB-UART-mini_2a.jpg|500px]]&lt;br /&gt;
&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=====Signaling =====&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
{| class=&amp;quot;wikitable&amp;quot; style=&amp;quot;width: 1000px;&amp;quot;&lt;br /&gt;
|-&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Type&lt;br /&gt;
! style=&amp;quot;text-align: center;&amp;quot;|Function&lt;br /&gt;
|-&lt;br /&gt;
| style=&amp;quot;text-align: center;&amp;quot;|&amp;lt;b&amp;gt;LEDs&amp;lt;/b&amp;gt;&lt;br /&gt;
| style=&amp;quot;text-align: left;&amp;quot;|&lt;br /&gt;
* Signaling of data transmission and reception&lt;br /&gt;
|}&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
There are 2 miniature LEDs on the converter board, which signal the flow of data between the interfaces.&lt;br /&gt;
&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmodUSB-UART-mini_4.jpg|300px]]&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=====Dimensions=====&lt;br /&gt;
The KAmod USB-UART-mini converter has small dimensions, the board measures 20.5x10.5 mm, and its heightis approx. 7 mm.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmodUSB-UART-mini_5.jpg|360px]]&lt;br /&gt;
&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=====Mounting in the housing=====&lt;br /&gt;
The KAmod USB-UART-mini converter can optionally be equipped with a front panel, which allows easy and aesthetic mounting of the module on the wall of almost any housing. The dimensions of the front panel are shown in the drawing below.&lt;br /&gt;
&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmodUSB-UART-mini_6.jpg|500px]]&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&amp;lt;br&amp;gt;&lt;br /&gt;
Mounting the converter requires making a main hole with a diameter of 11 mm and two holes in one line, for mounting screws with a diameter of approx. 2...3 mm at a distance of 8.75 mm from the center of the main hole. An example of the assembly is shown in the photos:&lt;br /&gt;
&amp;lt;br&amp;gt;&amp;lt;br&amp;gt;&lt;br /&gt;
&amp;lt;center&amp;gt;&lt;br /&gt;
[[File:KAmod_USB-UART-mini_5.jpg|400px]]&lt;br /&gt;
[[File:@KAmodUSB-UART-mini_2.jpg|400px]]&lt;br /&gt;
[[File:@KAmodUSB-UART-mini_3.jpg|400px]]&lt;br /&gt;
[[File:@KAmodUSB-UART-mini_4.jpg|400px]]&lt;br /&gt;
&amp;lt;/center&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=====External links=====&lt;br /&gt;
*[https://wiki.kamamilabs.com/images/1/10/FT230X.pdf FTDI FT230XS datasheet]&lt;br /&gt;
*[https://ftdichip.com/drivers/vcp-drivers/ FTDI drivers]&lt;/div&gt;</summary>
		<author><name>Grzegorzbecker</name></author>
	</entry>
</feed>