KAmodMEMS2: Difference between revisions
From Kamamilabs.com - Wiki
Anna Kubacka (talk | contribs) Created page with "__jzpdf__ ===== Description ===== KAmodMEMS2 is 3-axis motion sensor with SPI and I2C interfaces. Module is based on LIS35DE by STMicroelectronics. <center> File:kamodmems2..." |
Anna Kubacka (talk | contribs) |
||
Line 29: | Line 29: | ||
| style="text-align: center;"|<b>KAmodMEMS2</b> | | style="text-align: center;"|<b>KAmodMEMS2</b> | ||
| style="text-align: left;”| | | style="text-align: left;”| | ||
* | * Assembled module | ||
|} | |} | ||
</center> | </center> | ||
===== Schematic ===== | ===== Schematic ===== |
Revision as of 06:56, 19 July 2018
Description
KAmodMEMS2 is 3-axis motion sensor with SPI and I2C interfaces. Module is based on LIS35DE by STMicroelectronics.
Basic features
- LIS35DE – 3-axis motion sensor
- Operating voltage from 2.16 to 3.6V
- Low power consumption (<1mW)
- I2C and SPI interfaces (Kamami standard connectors)
- Two configurable interrupt generators
- Single click, double click and free fall detection
- Embedded high pass filter
- 10000g shock survivalibility
Standard equipment
Code | Description |
---|---|
KAmodMEMS2 |
|
Schematic
Board layout
SPI connector
Con2 connector has standard Kamami SPI pin layout (compatible with CAB_HU06 cable, ZL15AVR, ZL30ARM etc.). SPI interface is available also on Con1, which additionally has interrupt generator pins (INT1, INT2).
I2C connectors
KAmodMEMS2 module is equipped with I2C interface connectors: Con3, Con4, Con5. Con4 and Con5 have standard Kamami I2Cpin layout (compatible with CAB_HU04 cable, ZL15AVR, ZL30ARM etc.). Con6 can be used to connect to interrupt generator lines while using I2C.