Actions

KAmodLSM303: Difference between revisions

From Kamamilabs.com - Wiki

← Older edit
No edit summary
No edit summary
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
__jzpdf__
__jzpdf__
====== Opis ======
====== Description ======
[https://kamami.pl/kamod-kamami/557717-kamodlsm303-modul-akcelerometru-magnetometru-z-ukladem-lsm303d.html KAmodLSM303] to moduł z układem MEMS typu LSM303D. Układ ma cyfrowe wyjście sygnału (za pośrednictwem magistrali I2C lub SPI) i umożliwia pomiar przyspieszeń oraz wartości pola magentycznego w trzech osiach, zaś dzięki programowalnym wyjściom generatora przerwań, możliwe jest np. wybudzanie mikrokontrolera po wykryciu swobodnego spadku czy ruchu obiektu. Może być wykorzystany w systemach zasilanych napięciem 2,5 V - 5,5 V.
[https://kamami.pl/en/kamod-kamami-peripheral-modules/557724-kamodl3gd20-mems-gyroscope-module-with-l3gd20-chip-from-stmicroelectronics-5906623432486.html KAmodLSM303] is a module with MEMS LSM303D type. Chip has a digital output (with using I2C or SPI interface) and allow to make a measurement of acceleration and magnetic field value in three axis. Thanks to programmable interrupt outputs, it is possible e.g. wake up a microcontroller after free fall detection or object movement. Module can be used in system with power supply 2.5 - 5.5V.  
 
<center>
<center>
[[Plik:KAmodLSM303_moduł.png|none|400px|thumb|center]]
[[File:KAmodLSM303_moduł.png|none|400px|thumb|center]]
</center>
</center>


===== Podstawowe cechy i parametry =====
===== Basic features and parameters =====
*Układ LSM303D (akcelerometr oraz magnetometr MEMS) firmy STMicroelectronics
*LMS303D chip (accelerometer and magnetometer) from STMicroelectronics
*Zakres pomiarowy akcelerometru: ±2 / ±4 / ±6 / ±8 / ±16 g
*Measurement range of accelerometer: ±2 / ±4 / ±6 / ±8 / ±16g
*Zakres pomiarowy magnetometru: ±2 / ±4 / ±8 / ±12 Gauss
*Measurement range of magnetometer: ±2 / ±4 / ±8 / ±12 Gauss
*Napięcie zasilania: 2,5 - 5,5 V
*Power supply voltage: 2.5V - 5.5V
*Tryby uśpienia / niskiego poboru prądu
*Sleep mode / Low power mode
*Interfejs komunikacyjny: SPI / I2C
*Communication interface: SPI / I2C
*Wbudowany stabilizator oraz translator poziomów napięcia (linie SDA, SCL)
*Embedded voltage regulator and logic level translator (SDA and SCL lines)
*Programowalne generatory przerwań (przy swobodnym spadku, wykryciu ruchu, czy pola magnetycznego)
*Programmable interrupt generator (by free fall, movement detection or magnetic field detection)
*Otwory do przylutowania złącza szpilkowego
*Place for soldering of pin header
*Otwory montażowe o średnicy 3 mm
*Mounting holes 3mm
*Wymiary modułu (bez złącza): 27 mm x 15 mm x 3 mm
*Module size (without connector): 27mm x 15mm x 3mm


===== Wyposażenie standardowe =====
===== Standard equipment =====
<center>
<center>
{| class="wikitable"  style="width: 1000px;"
{| class="wikitable"  style="width: 1000px;"
|-
|-
! style="text-align: center;"|Kod
! style="text-align: center;"|Code
! style="text-align: center;"|Opis
! style="text-align: center;"|Description
|-
|-
| style="text-align: center;"|<b>KAmodLSM303</b>
| style="text-align: center;"|<b>KAmodLSM303</b>
| style="text-align: center;"|
| style="text-align: ledt;"|
*Zmontowany i uruchomiony moduł
*Assembled and launched module
*Złącze szpilkowe (męskie proste oraz kątowe) do wlutowania
*Pin header (male and angle) for soldering
|}
|}
</center>
</center>


===== Schemat elektryczny =====
===== Electrical schematic =====
<center>
<center>
[[Plik:KAmodLSM303_schemat.png|none|800px|thumb|center]]
[[File:KAmodLSM303_schemat.png|none|600px|thumb|center]]
</center>
</center>
===== Opis wyprowadzeń =====
===== Outputs description =====


<center>
<center>
{| class="wikitable"  style="width: 1000px;"
{| class="wikitable"  style="width: 1000px;"
|-
|-
! style="text-align: center;" rowspan="10"| [[Plik:KAmodLSM303 obrys PCB.png|center|200px]]
! style="text-align: center;" rowspan="10"| [[File:KAmodLSM303 obrys PCB.png|center|200px]]
! style="text-align: center;"|JP1
! style="text-align: center;"|JP1
! style="text-align: center;"|I2C
! style="text-align: center;"|I2C
Line 50: Line 50:
|-
|-
| style="text-align: center;"|+3.3V
| style="text-align: center;"|+3.3V
| rowspan="3" colspan="3" style="text-align: center;" |Zasilanie modułu
| rowspan="3" colspan="3" style="text-align: center;" |Module power supply
|-
|-
| style="text-align: center;"|+VIN
| style="text-align: center;"|+VIN
Line 77: Line 77:
|-
|-
| style="text-align: center;"|INT2
| style="text-align: center;"|INT2
| colspan="3" style="text-align: center;" |Wyjście przerwania 2
| colspan="3" style="text-align: center;" |Interrupt 2 output
|-
|-
| style="text-align: center;"|INT1
| style="text-align: center;"|INT1
| colspan="3" style="text-align: center;" |Wyjście przerwania 1
| colspan="3" style="text-align: center;" |Interrupt 1 output
|}
|}
</center>
</center>
===== Linki zewnętrzne =====
=====External links =====
*[http://download.kamami.pl/p557717-KAmodLSM303D_LSM303_DS.pdf Karta katalogowa układu LSM303D]
*[http://download.kamami.pl/p557717-KAmodLSM303D_LSM303_DS.pdf LSM303D chip datasheet]
 
[[Kategoria:Moduły peryferyjne KAmod (Kamami)]]
[[Kategoria:Zawartość]]

Latest revision as of 17:18, 1 November 2024

Description

KAmodLSM303 is a module with MEMS LSM303D type. Chip has a digital output (with using I2C or SPI interface) and allow to make a measurement of acceleration and magnetic field value in three axis. Thanks to programmable interrupt outputs, it is possible e.g. wake up a microcontroller after free fall detection or object movement. Module can be used in system with power supply 2.5 - 5.5V.

Basic features and parameters
  • LMS303D chip (accelerometer and magnetometer) from STMicroelectronics
  • Measurement range of accelerometer: ±2 / ±4 / ±6 / ±8 / ±16g
  • Measurement range of magnetometer: ±2 / ±4 / ±8 / ±12 Gauss
  • Power supply voltage: 2.5V - 5.5V
  • Sleep mode / Low power mode
  • Communication interface: SPI / I2C
  • Embedded voltage regulator and logic level translator (SDA and SCL lines)
  • Programmable interrupt generator (by free fall, movement detection or magnetic field detection)
  • Place for soldering of pin header
  • Mounting holes 3mm
  • Module size (without connector): 27mm x 15mm x 3mm
Standard equipment
Code Description
KAmodLSM303
  • Assembled and launched module
  • Pin header (male and angle) for soldering
Electrical schematic
Outputs description
 JP1 I2C SPI 3-wire SPI 4-wire
+3.3V Module power supply
+VIN
GND
SDA/SDI/SDO SDA SDI/SDO SDI
SCL/SPC SCL SPC SPC
SDO/SA0 SA0 - SDO
CS CS CS CS
INT2 Interrupt 2 output
INT1 Interrupt 1 output
External links
Retrieved from "http://wiki.kamamilabs.com/index.php?title=KAmodLSM303&oldid=4810"