KAmodTFT2: Difference between revisions
From Kamamilabs.com - Wiki
No edit summary |
|||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
__jzpdf__ | __jzpdf__ | ||
===== Description ===== | ====== Description ====== | ||
KAmodTFT2 is easy to use module with color graphic LCD (compatible with Nokia 6100/6610 cellular phone display). | [https://kamami.pl/en/graphic-lcd-displays/138918-kamodtft2-5906623432318.html KAmodTFT2] is easy to use module with color graphic LCD (compatible with Nokia 6100/6610 cellular phone display). | ||
<center> | <center> | ||
[[File:kamodtft2_właczany.jpg|none|400px|thumb|center]] | [[File:kamodtft2_właczany.jpg|none|400px|thumb|center]] | ||
</center> | </center> | ||
===== Features ===== | ===== Features ===== | ||
Latest revision as of 09:09, 2 November 2024
Description
KAmodTFT2 is easy to use module with color graphic LCD (compatible with Nokia 6100/6610 cellular phone display).
Features
- 132×132 pixel LCD
- Compatible with Nokia 6100/6610 display (PCF8833 or similar controller)
- Power supply: 3.3 or 5VDC
- 3-lines serial interface
| PCF8833 controller documentation is available at: https://download.kamami.pl/p138918-pcf8833_1.pdf. |
Standard equipment
| Code | Description |
|---|---|
| KAmodTFT2 |
|
Module connectors
| Pin number | Name | Description | Type |
|---|---|---|---|
| 1 | CLK | Clock signal for DIN data line | Input |
| 2 | GND | Ground | Power supply |
| 3 | DIN | Data input line | Input |
| 4 | - | - | - |
| 5 | - | - | - |
| 6 | - | - | - |
| 7 | ~RES | Reset (high level active) | Input |
| 8 | - | - | - |
| 9 | +V | Power supply 3.3 or 5 VDC | Power supply |
| 10 | ~SCE | Serial interface enable (high level active)) | Input |
Supply voltage selection
KAmodTFT2 module can be supplied with 3.3 V or 5 V. Voltage can be selected with PWR jumper (JP1)
