Actions

ZL8AVR: Difference between revisions

From Kamamilabs.com - Wiki

← Older edit
 
(5 intermediate revisions by 2 users not shown)
Line 2: Line 2:


Evaluation Board for dipAVR Mini-module  
Evaluation Board for dipAVR Mini-module  
 
=====  Introduction =====
======  Introduction ======
ZL8AVR is a versatile evaluation board designed for engineers and hobbyists who want to prototype systems based on AVR ATmega microcontrollers. ZL8AVR is prepared to operate with dipAVR mini-modules (ZL7AVR, ZL12AVR). Board's configuration is complete and user can find on the board the following components: USB interface connector (for ZL1USB module), RS232 interface with DB9F connector, simple keyboard (4 buttons), 8 LEDs, JTAG connector and socket for LCD display (2x16 characters). ZL8AVR board comes with examples of Bascom programs.  
[https://kamami.pl/en/avr-sets/18517-zl8avr-5906623433056.html ZL8AVR] is a versatile evaluation board designed for engineers and hobbyists who want to prototype systems based on AVR ATmega microcontrollers. ZL8AVR is prepared to operate with dipAVR mini-modules (ZL7AVR, ZL12AVR). Board's configuration is complete and user can find on the board the following components: USB interface connector (for ZL1USB module), RS232 interface with DB9F connector, simple keyboard (4 buttons), 8 LEDs, JTAG connector and socket for LCD display (2x16 characters). ZL8AVR board comes with examples of Bascom programs.  




Line 76: Line 76:


===== Power supply  =====
===== Power supply  =====
ZL8AVR can be supplied from:  
ZL8AVR can be powered from:  
* power supply adaptor (9...12 VDC/VAC, 250 mA),  
* power supply adaptor (9...12 VDC/VAC, 250 mA),  
USB port.
* USB port.


Power supply source selection (jumper JP8 – PWR_SEL)  
Power supply source selection (jumper JP8 – PWR_SEL)  
Line 85: Line 85:
|-
|-
! style="text-align: center;"|JP8 position  
! style="text-align: center;"|JP8 position  
! style="text-align: center;"|EXT (2-3)
| style="text-align: center;"|EXT (2-3)
! style="text-align: center;"|USB (1-2)  
| style="text-align: center;"|USB (1-2)  
|-
|-
| style="text-align: center;"|Power supply source
! style="text-align: center;"|Power supply source
| style="text-align: center;"|...EXT_PWR (ZL4)  
| style="text-align: center;"|...EXT_PWR (ZL4)  
| style="text-align: center;"|...USB_PWR (Gn2)  
| style="text-align: center;"|...USB_PWR (Gn2)  
Line 105: Line 105:
[[File:Zl8avr_power_sch.JPG|none|600px|thumb|center]]
[[File:Zl8avr_power_sch.JPG|none|600px|thumb|center]]
</center>
</center>


===== Keyboard  =====
===== Keyboard  =====
Line 159: Line 158:
===== LEDs  =====
===== LEDs  =====
ZL8AVR is equipped with 8 LEDs, that show states of port PC lines. Jumper JP7 lets you turn on/off LEDs .
ZL8AVR is equipped with 8 LEDs, that show states of port PC lines. Jumper JP7 lets you turn on/off LEDs .
Zestaw wyposażono w osiem diod LED przeznaczonych do sygnalizacji stanu portu PC mikrokontrolera (aktywny stan wysoki). Diody LED można włączać i wyłączać za pomocą jumpera JP7/LED.




Line 215: Line 211:
[[File:Zl8avr_led_sch.JPG|none|600px|thumb|center]]
[[File:Zl8avr_led_sch.JPG|none|600px|thumb|center]]
</center>
</center>


===== Alphanumeric LCD display =====
===== Alphanumeric LCD display =====

Latest revision as of 17:29, 2 November 2024

Evaluation Board for dipAVR Mini-module

Introduction

ZL8AVR is a versatile evaluation board designed for engineers and hobbyists who want to prototype systems based on AVR ATmega microcontrollers. ZL8AVR is prepared to operate with dipAVR mini-modules (ZL7AVR, ZL12AVR). Board's configuration is complete and user can find on the board the following components: USB interface connector (for ZL1USB module), RS232 interface with DB9F connector, simple keyboard (4 buttons), 8 LEDs, JTAG connector and socket for LCD display (2x16 characters). ZL8AVR board comes with examples of Bascom programs.


Features
  • RS232 interface (with level converter and DB9F connector)
  • JTAG connector
  • Built-in 5 V voltage regulator
  • Socket for LCD 2x16 character display (LCD1602 module)
  • 8 LEDs
  • MMC Flash card connector
  • 4 microswitches
  • Socket for USB interface (ZL1USB module)
  • Prototype design area
  • USB (5 V) or external (9...12 VDC) power supply


Contents of the package
Code Description
ZL8AVR
  • ZL8AVR board (without microcontrollers and LCD display)


Complete schematic

Circuit diagram is shown on Fig. 1. Recommended supply voltage is 9 VDC (9...12 VDC) connected via standard power jack or USB_PWR connector (selectable by JP8). Polarisation of input voltage is not important – bridge rectifier guarantees proper board operation in both cases.

Fig. 1. Complete electric schematic of ZL8AVR board

dipAVR module

JP2 and JP3 connectors make socket for dipAVT module with AVR microcontroller.

ZL7AVR - dipAVR module with ATmega128 microcontroller:


dipAVR module and ZL8AVR base board:



Power supply

ZL8AVR can be powered from:

  • power supply adaptor (9...12 VDC/VAC, 250 mA),
  • USB port.

Power supply source selection (jumper JP8 – PWR_SEL)

JP8 position EXT (2-3) USB (1-2)
Power supply source ...EXT_PWR (ZL4) ...USB_PWR (Gn2)




Keyboard

ZL8AVR has 4 switches. SW2...4 are connected to microcontroller port lines as shown in table. SW1 can be used as universal button or reset button (you can set its function by setting JP13 jumper)


Buttons to microcontroller line assingment

AVR I/O line PD7 PD6 PD5 PD4 RES
Switch SW4 SW3 SW2 SW1 (Set by JP13 ) SW1 (Set by JP13 )


SW1 function

AVR I/O line PD4 RES
JP13 position PD4 RES




LEDs

ZL8AVR is equipped with 8 LEDs, that show states of port PC lines. Jumper JP7 lets you turn on/off LEDs .


JP7 (LED) settings

Position Description
On (1-2) LEDs D1...D8 show PC0...7 states
Off (2-3) LEDs D1...D8 disconnected


Connections between port PC lines and LEDs

AVR I/O line PC7 PC6 PC5 PC4 PC3 PC2 PC1 PC0
LED D8 D7 D6 D5 D4 D3 D2 D1



Alphanumeric LCD display

Standard LCD display with HD44780 controller (LCD1602 module) can be mounted in W1 socket.

Connections between microcontroller and display module

AVR I/O line PA2 PA3 PA4 PA5 PA6 PA7
LCD module signal name RS E D4 D5 D6 D7
LCD module pin 4 6 11 12 13 14




IRS232 and USB interfaces

ZL8AVR has two serial communication interfaces:

  • Built-in RS232 interface (voltage converter U2),
  • USB interface (eg. ZL1USB), optionally connected to JP11 header.

Depending on selected communication interface, lines PE0 and PE1 have to be configured by jumpers


Communication interface selectors (other jumpers configurations are not allowed)

Active port JP5 JP6 JP9 JP10
USB On On USB USB
RS232 On On MAX MAX
None Off Off - -




MMC card connector

ZL8AVR is equipped with MMC card connector. You can use cards with I/O interfaces that operate with at least 3.3 V voltage.

Connections between microcontroller and MMC card

AVR I/O line PB0 PB1 PB2 PB3
AVR signal name /SS SCK MOSI MISO
MMC card line /CS CLK DataIn DataOut




JTAG connector

ZL8AVR is equipped with JP12 connector, that allows you to connect JTAG interface. Pin layout is compatible with Atmel JTAG standard




I/O headers


Retrieved from "http://wiki.kamamilabs.com/index.php?title=ZL8AVR&oldid=5008"