KAmodRPi-Pmod-HAT: Difference between revisions
From Kamamilabs.com - Wiki
Anna Kubacka (talk | contribs) No edit summary |
|||
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
__jzpdf__ | __jzpdf__ | ||
====== Description ====== | ====== Description ====== | ||
[https://kamami.pl/ | [https://kamami.pl/en/extension-modules-for-raspberry-pi/572088-kamodrpi-pmod-hat-connector-expander-for-raspberry-pi.html KAmodRPi-Pmod-HAT] is a HAT for Raspberry Pi 4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector. The overlay provides connectors in the Pmod standard and in the KAMAMI standard for I2C, SPI and UART interfaces. | ||
<center> | <center> | ||
[[File:KAmodRPi-Pmod-HAT_modul.png|none|600px|thumb|center]] | [[File:KAmodRPi-Pmod-HAT_modul.png|none|600px|thumb|center]] | ||
| Line 16: | Line 16: | ||
*Embedded jumpers enabling pull-up on I2C bus lines | *Embedded jumpers enabling pull-up on I2C bus lines | ||
*Mounting holes with a diameter of 2.5 mm | *Mounting holes with a diameter of 2.5 mm | ||
*Dimensions: 65 mm x 56 mm x | *Dimensions: 65 mm x 56 mm x 16 mm | ||
===== Standard equipment ===== | ===== Standard equipment ===== | ||
| Line 27: | Line 27: | ||
| style="text-align: center;"|<b>KAmodRPi-Pmod-HAT</b> | | style="text-align: center;"|<b>KAmodRPi-Pmod-HAT</b> | ||
| style="text-align: center;"| | | style="text-align: center;"| | ||
* | * Assembled and launched module | ||
* Four spacers with a set of screws for mounting | * Four spacers with a set of screws for mounting | ||
Latest revision as of 11:22, 23 September 2020
Description
KAmodRPi-Pmod-HAT is a HAT for Raspberry Pi 4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector. The overlay provides connectors in the Pmod standard and in the KAMAMI standard for I2C, SPI and UART interfaces.
Basic parameters
- Expansion module for Raspberry Pi 4B, 3B+, 3B, 2B, B+ minicomputers
- Embedded ID-EEPROM memory
- Connectors for I2C, SPI and UART interfaces
- Pmod connectors
- KAMAMI connectors
- 40-pin through connector compatible with the Raspberry Pi standard
- Embedded jumpers enabling pull-up on I2C bus lines
- Mounting holes with a diameter of 2.5 mm
- Dimensions: 65 mm x 56 mm x 16 mm
Standard equipment
| Code | Description |
|---|---|
| KAmodRPi-Pmod-HAT |
|
Schematic
Pin description - I2C KAMAMI standard connector
 |
Pin number | Function |
|---|---|---|
| 1 (VDD_3,3V) | Power supply (max. 3,3 V) | |
| 2 (SCL) | Clock line of the I2C bus | |
| 3 (SDA) | Data line of the I2C bus | |
| 4 (GND) | Ground |
Opis wyprowadzeń – złącze SPI standardu KAMAMI
 |
Pin number | Function |
|---|---|---|
| 1 (VDD_3,3V) | Power supply (max. 3,3 V) | |
| 2 (CS) | CS line of the SPI bus | |
| 3 (MOSI) | Data line to peripheral chip of the SPI bus | |
| 4 (MISO) | Data line from peripheral chip of the SPI bus | |
| 5 (CLK) | Clock line of the SPI bus | |
| 6 (GND) | Ground |
Opis wyprowadzeń – złącze I2C standardu Pmod
 |
Pin number | Function |
|---|---|---|
| 1, 2 (SCL) | Clock line of the I2C bus | |
| 3, 4 (SDA) | Data line of the I2C bus | |
| 5, 6 (GND) | Ground | |
| 7, 8 (VDD_3,3V) | Power supply (max. 3,3 V) | |
| 9, 10 (INT) | Interrupt line | |
| 11, 12 (RESET) | Reset line |
Opis wyprowadzeń – złącze SPI standardu Pmod
 |
Pin number | Function | Pin number | Function |
|---|---|---|---|---|
| 1 (CS) | CS line of the SPI bus | 7 (INT SPI) | Interrupt line | |
| 2 (MOSI) | Data line to peripheral chip of the SPI bus | 8 (RESET SPI) | Reset line | |
| 3 (MISO) | Data line from peripheral chip of the SPI bus | 9 (GPIO20) | Linia I/O | |
| 4 (CLK) | Clock line of the SPI bus | 10 (GPIO18) | Linia I/O | |
| 5 (GND) | Ground | 11 (GND) | Ground | |
| 6 (VDD_3,3V) | Power supply (max. 3,3 V) | 12 (VDD_3,3V) | Power supply (max. 3,3 V) |
Opis wyprowadzeń – złącze UART standardu Pmod
 |
Pin number | Function |
|---|---|---|
| 1 (CTS) | CTS line of the UART bus | |
| 2 (TXD) | TX data line of the UART bus | |
| 3 (RXD) | RX data line of the UART bus | |
| 4 (RTS) | RTS line of the UART bus | |
| 5 (GND) | Ground | |
| 6 (VDD_3,3V) | Power supply (max. 3,3 V) |
I2C bus lines
The KAmodRPi-Pmod-HAT module is equipped with jumpers that allow the connection of pull-up resistors to the VCC to the I2C bus line. Jumpers allow the independent activation of chin up for SDA and SCL lines.
Write protection of the ID EEPROM memory
The KAmodRPi-Pmod-HAT module is equipped with a jumper that allows write block to EEPROM memory. Write Protect protects against unwanted attempts to write data to memory.
Dimensions
