KAmodMicroSD: Difference between revisions
From Kamamilabs.com - Wiki
Created page with "__jzpdf__ ====== Description ====== [https://kamami.pl/kamod-kamami/… KAmodMicroSD] is a module with a micro SD (TF) card reader. It allows you to connect and operate popula..." |
|||
| (6 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
__jzpdf__ | __jzpdf__ | ||
====== Description ====== | ====== Description ====== | ||
[https://kamami.pl/ | [https://kamami.pl/en/memory-card-readers/587139-kamodmicrosd-miniature-microsd-card-reader.html KAmodMicroSD] is a module with a micro SD (TF) card reader. It allows you to connect and operate popular memory cards using a microcontroller. It is commonly used in various devices to store images, sounds or measurement data. On the board there is a 3.3 V voltage regulator and a voltage level converter enabling operation with 3.3 V and 5 V systems. For communication, the module uses the SPI interface available on the connector with a pitch of 2.54 mm. | ||
<center> | <center> | ||
| Line 23: | Line 23: | ||
! style="text-align: center;"|Description | ! style="text-align: center;"|Description | ||
|- | |- | ||
| style="text-align: center;"|<b> | | style="text-align: center;"|<b>KAmodMicroSD module</b> | ||
| style="text-align: | | style="text-align: left;"| | ||
*Assembled and launched module | *Assembled and launched module | ||
|} | |} | ||
| Line 43: | Line 43: | ||
! style="text-align: center;"|Function | ! style="text-align: center;"|Function | ||
|- | |- | ||
| style="text-align: center;"|VCC | | style="text-align: center;"|(1st Pin) VCC | ||
| style="text-align: center;" |Power supply | | style="text-align: center;" |Power supply | ||
|- | |- | ||
| Line 73: | Line 73: | ||
[[File:KAmodMicroSD_wymiary_PCB.png|none|275px|thumb|center]] | [[File:KAmodMicroSD_wymiary_PCB.png|none|275px|thumb|center]] | ||
</center> | </center> | ||
Latest revision as of 18:24, 1 November 2024
Description
KAmodMicroSD is a module with a micro SD (TF) card reader. It allows you to connect and operate popular memory cards using a microcontroller. It is commonly used in various devices to store images, sounds or measurement data. On the board there is a 3.3 V voltage regulator and a voltage level converter enabling operation with 3.3 V and 5 V systems. For communication, the module uses the SPI interface available on the connector with a pitch of 2.54 mm.
Basic features
- Micro SD card slot
- SPI interface
- 3.3V 250mA voltage regulator
- 3.3V/5V voltage level converter
- 2.54mm goldpin connector
- Power supply: 3.7V to 5V
Standard equipment
| Code | Description |
|---|---|
| KAmodMicroSD module |
|
Schematic
Output description - P1 connector
 |
P1 | Function |
|---|---|---|
| (1st Pin) VCC | Power supply | |
| +3V3 | 3,3 V | |
| GND | GND | |
| CS | CS signal | |
| DI | Data input | |
| CLK | Clock | |
| DO | Data output | |
| CD | CD signal |
Dimensions
