KAmodLVC: Difference between revisions
From Kamamilabs.com - Wiki
m Text replacement - "__jzpdf__" to "__jzXpdf__" |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__jzpdf__ | |||
====== Description ====== | ====== Description ====== | ||
KAmodLVC allows connecting two digital systems with different supply voltages (1.8V to 5.5V) | [https://kamami.pl/en/voltage-converters/63662-kamodlvc-5906623433094.html KAmodLVC] allows connecting two digital systems with different supply voltages (1.8V to 5.5V) | ||
<center> | <center> | ||
| Line 22: | Line 22: | ||
* 5V TTL level OE output | * 5V TTL level OE output | ||
* High ESD (Electro-Static Discharge) resistance | * High ESD (Electro-Static Discharge) resistance | ||
* On-board overvoltage protection 15kV (on I/OVCC lines) | * On-board overvoltage protection 15kV (on I/OVCC lines) | ||
* Dimensions: 35 x 50 x 20 mm | |||
===== Standard equipment ===== | ===== Standard equipment ===== | ||
Latest revision as of 13:09, 29 July 2025
Description
KAmodLVC allows connecting two digital systems with different supply voltages (1.8V to 5.5V)
Introduction
KAmodLVC with ST2378 is a 8-bit bidirectional voltage converter. It can be used for connecting two digital systems with different supply voltages (1.8V to 5.5V). OE allows to switch ST2378 circuit to idle state (current consumption less than 1μA and all input/output lines in high impedance state).
Basic Features
- Bidirectional conversion of supply voltages, no direction switching needed
- Voltages range:
- VL = 1.71V to VCC
- VCC = 1.71V to 5.5V
- Transmission speed up to 13Mb/s (1.8V ≤ VL ≤ VCC ≤ 5.5V)
- 5V TTL level OE output
- High ESD (Electro-Static Discharge) resistance
- On-board overvoltage protection 15kV (on I/OVCC lines)
- Dimensions: 35 x 50 x 20 mm
Standard equipment
| Code | Description |
|---|---|
| KAmodLVC |
|
Schematics
Board Layout
Usage Example
