KA-LOGO!-IO-Simulator: Difference between revisions

Latest revision as of 16:05, 1 November 2024

Description

KA-LOGO!-IO-Simulator kit helps to simulate logical states on the Siemens LOGO! 8 logical controler. With the IO simulator board, You can simulate each bits on the LOGO! inputs using toggle switches. It is possible to use the embedded LOGO! ADC's to measure a voltage, ALS or temperature values.

Included LED module can signalise states of four LOGO! outputs. Integrated LED drivers (NCR401U by Nexperia) provides constant brightness of the indicators.

The kit is especially recommended for Automation Engineers and persons, who wants to learn and tests their codes without connecting every used sensors.

Attention! The product is designed for the Siemens 6ED1052-1MD00-0BA8 and 6ED1052-1MD08-0BA0 logic controllers. In case of using the product with other Siemens Logo! 8 controller, please ensure it's compatibility.

Parameters

IO simulator module:
- The module is dedicated for using with LOGO! 8 (supplied from 24 V DC)
- It has gold plated pins, which provides the best contact with PLC terminal blocks.
- It allows to simulate each eight bits using two position switches
- It allows to use the capabilities of the built-in LOGO! 8 ADC converters by measure the analog value from sensors (switch by J7, J8):
  - temperature sensor MCP9700, with output voltage scalled to the measure range of LOGO! 8 (+5…+105°C)
  - potentiometer
  - phototoresistor (ALS)
  - external sensor, connected to the terminal blocks (EXTIN)
- It is equipped with terminal blocks, which gives the possibility of easy connecting to the 24V DC power source and to the external sensor.
- Using special spacers (included), the IO simulator module doesn't strain the terminal blocks of LOGO! 8 logic controller.

Attention! The IO simulator module works correctly only with LOGO! 8 supplied from the 24V DC power source.

LED indicators module:
- The module is dedicated for using with LOGO! 8 (supplied from 24 V DC)
- Gives a posibility of indicating digital output states of the LOGO! 8 (Q1...Q4)
- Built-in NCR401U LED drivers by Nexperia provides constant lights brightness
- It has gold plated pins, which provides the best contact with PLC terminal blocks.
- It has terminal block, which gives the possibility of easy connecting the 24V DC lines

Attention! LED indicators module works correctly only with the LOGO! 8 supplied from the 24V DC power source.

Included

Code	Description
KA-LOGO!-IO-Simulator	Assembled and tested module of IO simulator Assembled and tested module of LED indicators Two spacer sleeves Two screws for spacer sleeves

Terminal blocks (for supply)

The IO simulator module has four terminal blocks. Connectors marked as "L+" and "M" are used to connecting and forwarding the power supply between modules. Double terminal blocks on the left side allows for:

[upper] - connect a power supply to the module and the LOGO! 8 device
[lower] - forward supply for the IO indicators module

Simulator's board switches

The IO simulator module is equipped with toggle switches marked as INP: I1-I8, , which sets the digital states on each lines of the LOGO! 8 module. Selectors INP: I7, I8 can be used to connect the analog signals to LOGO! 8 ADC's. Using two switches "SEL", You can configure the signal character on the I7/I8 lines (by connecting to supply voltages for bit simulation or by connecting to a analog lines). Slide switches allows to configure the analog inputs. Line Al1 might be connected to ALS sensor (LIGHT) or potentiometer (POT). For the Al2 line You can select readings from temperature sensor (TEMP) or external analog input (EXTIN).

Switch	Position	Description
I1...I8	0	Low logic level on the I1...I8 lines
I1...I8	1	High logic level on the I1...I8 lines
SEL [I7/Al1]	I7	I7 switch sets the logical states
SEL [I7/Al1]	Al1	The I7 voltage depends on the analog value from ALS sensor or potentiometer
SEL [I8/Al2]	I8	I8 switch sets the logical states
SEL [I8/Al2]	Al2	The I8 voltage depends on the analog value from temperature sensor or the EXTIN input
LIGHT/POT	LIGHT	Analog voltage measures from the ALS sensor
LIGHT/POT	POT	Analog voltage measures from the potentiometer slide.
TEMP/EXTIN	TEMP	Analog voltage measures from the temperature sensor
TEMP/EXTIN	EXTIN	Analog voltage measures from the EXTIN input

Potentiometer

The potentiometer on the IO simulator board could be connected to the I7 line. Voltage of the potentiometer slide has range from 0 to 10 Volts DC.

Ambient Light Sensor

The ALS sensor of the IO Simulation board could be connected to the I7 line of LOGO! 8. Output voltage of the photoresitor has range from 0 to 10 Volts DC (depending on ambient light level).

Temperature sensor

On the IO Simulator module the voltage matching circut is applied for temperature sensor MCP9700. It scales the temperature sensor output voltage to the ADC range of LOGO! 8 device. On the line I8, it is possible to obtain 0 to 10 V DC range (with 12-20mV margin from 10V line) for temperatures measured from +5 to +105 Centigrade degrees.

External sensor connector (EXTIN)

It is possible to connect a external sensor to the IO Simulator module. Output voltage of connected sensor must not be higher than 5V DC. 5V power supply for the external sensor is available on terminal block, located at right side. For example, the compatible external sensor is Pololu - 2474. Connection method is shown on the image:

Spacer sleeves

Included spacer sleeves needs to be mounted to the IO Simulator module for preventing a tensions of board (and the excessive exploitation of LOGO! 8 terminal blocks). The mountage method is shown on the foto:

External links

Article (language: PL) "Sample application of LOGO! 8. Digital thermometer with signaling of over thresholds" on the EP portal

@@ Line 1: / Line 1: @@
-====== Opis ======
+__jzpdf__
-[https://kamami.pl/sterowniki-plc/563006-ka-logo-io-simulator-zestaw-symulacyjny-dla-sterownika-siemens-logo-8.html KA-LOGO!-IO-Simulator] to zestaw symulacyjny dla sterownika logicznego [https://kamami.pl/sterowniki-plc/563424-zestaw-startowy-logo-8-siemens-rce-6ed1052-1md00-0ba8.html Siemens LOGO! 8] (dostępnego również w  [https://kamami.pl/sterowniki-plc/563425-zestaw-startowy-logo-8-edu-siemens-rce-6ed1052-1md00-0ba8.html wersji edukacyjnej]). Dzięki płytce symulatora IO, możliwe jest zasymulowanie poszczególnych bitów na wejściach sterownika przy pomocy przełączników, jak i również wykorzystanie wbudowanego w sterownik przetwornika ADC do pomiaru napięcia, naświetlenia czy temperatury.
+====== Description ======
+[https://kamami.pl/sterowniki-plc/563006-ka-logo-io-simulator-zestaw-symulacyjny-dla-sterownika-siemens-logo-8.html KA-LOGO!-IO-Simulator] kit helps to simulate logical states on the [https://kamami.pl/sterowniki-plc/563424-zestaw-startowy-logo-8-siemens-rce-6ed1052-1md00-0ba8.html Siemens LOGO! 8] logical controler. With the IO simulator board, You can simulate each bits on the LOGO! inputs using toggle switches. It is possible to use the embedded LOGO! ADC's to measure a voltage, ALS or temperature values.
+<center>
+[[File:KA-LOGO!-IO-Simulator_modul.png|none|600px|thumb|center]]
+</center>
+Included LED module can signalise states of four LOGO! outputs. Integrated LED drivers (NCR401U by Nexperia) provides constant brightness of the indicators.
 <center>
-[[Plik:KA-LOGO!-IO-Simulator_modul.png|none|600px|thumb|center]]
+[[File:KA-LOGO!-IO-Simulator_modul_LED.png|none|500px|thumb|center]]
 </center>
-Znajdujący się w zestawie moduł z diodami elektroluminescencyjnymi pozwala na sygnalizację stanów na czterech wyjściach sterownika LOGO!, zaś wbudowane drivery LED typu NCR401U firmy Nexperia zapewniają stałą jasność kontrolek.
+The kit is especially recommended for Automation Engineers and persons, who wants to learn and tests their codes without connecting every used sensors.
 <center>
-[[Plik:KA-LOGO!-IO-Simulator_modul_LED.png|none|500px|thumb|center]]
+{| class="wikitable"  style="width: 1000px;"
+|-
+! style="text-align: center;"|Attention! The product is designed for the Siemens 6ED1052-1MD00-0BA8 and 6ED1052-1MD08-0BA0 logic controllers. In case of using the product with other Siemens Logo! 8 controller, please ensure it's compatibility.
+|}
 </center>
-Zestaw szczególnie polecany automatykom i osobom uczącym się programowania w LOGO!, chcącym przetestować pisane aplikacje bez mozolnego podłączania wszystkich wymaganych czujników.
-===== Podstawowe cechy i parametry =====
+===== Parameters =====
-*Moduł symulatora IO:
+*IO simulator module:
-**Moduł dedykowany dla  sterownika LOGO! 8 (zasilanego napięciem 24 V DC)
+**The module is dedicated for using with LOGO! 8 (supplied from 24 V DC)
-**Wyposażony w złocone styki, zapewniające dobry kontakt ze złączami śrubowymi sterownika.
+**It has gold plated pins, which provides the best contact with PLC terminal blocks.
-**Pozwala na symulację do ośmiu bitów przy pomocy dwupozycyjnych przełączników dźwigniowych
+**It allows to simulate each eight bits using two position switches
-**Pozwala na wykorzystanie możliwości wbudowanego w LOGO! 8 przetwornika ADC, dając możliwość wykorzystania dwóch linii (J7, J8) do pomiaru wartości z czujników analogowych (przełączane):
+**It allows to use the capabilities of the built-in LOGO! 8 ADC converters by measure the analog value from sensors (switch by J7, J8):
-***czujnika temperatury MCP9700, o napięciu wyjściowym przeskalowanym do zakresu pomiarowego LOGO! 8 (+5…+105°C)
+***temperature sensor MCP9700, with output voltage scalled to the measure range of LOGO! 8 (+5…+105°C)
-***potencjometru
+***potentiometer
-***fotorezystora
+***phototoresistor (ALS)
-***zewnętrznego czujnika, dołączonego do złącz śrubowych
+***external sensor, connected to the terminal blocks (EXTIN)
-**Ma złącza śrubowe, pozwalające na łatwe dołączenie zasilania 24 V DC oraz zewnętrznego czujnika
+**It is equipped with terminal blocks, which gives the possibility of easy connecting to the 24V DC power source and to the external sensor.
-**Dzięki specjalnym podporom (znajdującym się w zestawie), moduł nie nadwyręża złącz śrubowych sterownika
+**Using special spacers (included), the IO simulator module doesn't strain the terminal blocks of LOGO! 8 logic controller.
 <center>
 {| class="wikitable"  style="width: 1000px;"
 |-
-! style="text-align: center;"|Uwaga! Moduł symulatora I/O funkcjonuje tylko z LOGO!8 zasilanym napięciem 24 V DC!
+! style="text-align: center;"|Attention! The IO simulator module works correctly only with LOGO! 8 supplied from the 24V DC power source.
 |}
 </center>
-*Moduł kontrolek LED:
+*LED indicators module:
-**Moduł dedykowany dla sterownika LOGO! 8
+**The module is dedicated for using with LOGO! 8 (supplied from 24 V DC)
-**Pozwala na prezentację stanów czterech wyjść cyfrowych sterownika LOGO! 8 (Q1...Q4)
+**Gives a posibility of indicating digital output states of the LOGO! 8 (Q1...Q4)
-**Wbudowane drivery LED NCR401U firmy Nexperia zapewniają jednakową jasność świecenia kontrolek LED
+**Built-in NCR401U LED drivers by Nexperia provides constant lights brightness
-**Wyposażony w złocone styki, zapewniające dobry kontakt ze złączami śrubowymi sterownika.
+**It has gold plated pins, which provides the best contact with PLC terminal blocks.
-**Ma złącze śrubowe, pozwalające na łatwe dołączenie zasilania 24 V DC
+**It has terminal block, which gives the possibility of easy connecting the 24V DC lines
 <center>
 {| class="wikitable"  style="width: 1000px;"
 |-
-! style="text-align: center;"|Uwaga! Moduł kontrolek LED funkcjonuje tylko z LOGO!8 zasilanym napięciem 24 V DC!
+! style="text-align: center;"|Attention! LED indicators module works correctly only with the LOGO! 8 supplied from the 24V DC power source.
 |}
 </center>
-===== Wyposażenie standardowe =====
+===== Included =====
 <center>
 {| class="wikitable"  style="width: 1000px;"
 |-
-! style="text-align: center;"|Kod
+! style="text-align: center;"|Code
-! style="text-align: center;"|Opis
+! style="text-align: center;"|Description
 |-
 | style="text-align: center;"|<b>KA-LOGO!-IO-Simulator</b>
-| style="text-align: center;"|
+| style="text-align: left;"|
-*Zmontowany i uruchomiony moduł symulatora IO oraz moduł kontrolek LED
+*Assembled and tested module of IO simulator
-*Dwie podpory (tuleje dystansowe)
+*Assembled and tested module of LED indicators
-*Dwie śrubki montażowe podpór
+*Two spacer sleeves
+*Two screws for spacer sleeves
 |}
 </center>
-===== Złącza śrubowe (zasilanie) =====
+===== Terminal blocks (for supply) =====
-Płytka symulatora I/O dysponuje czterema złączami śrubowymi. Złącza z oznaczeniami "L+" i "M" służą do podłączenia i przekazywania zasilania między modułami. Podwójne złącze śrubowe po lewej stronie pozwala na:
+The IO simulator module has four terminal blocks. Connectors marked as "L+" and "M" are used to connecting and forwarding the power supply between modules. Double terminal blocks on the left side allows for:
-*[górne] dołączenie zasilania do modułu symulatora i jednocześnie zasilenia sterownika LOGO! 8
+*[upper] - connect a power supply to the module and the LOGO! 8 device
-*[dolne] - przekazanie zasilania do modułu kontrolek I/O przy użyciu przewodów
+*[lower] - forward supply for the IO indicators module
 <center>
-[[Plik:KA-LOGO!-IO-Simulator_zlacza_srubowe.png|none|600px|thumb|center]]
+[[File:KA-LOGO!-IO-Simulator_zlacza_srubowe.png|none|500px|thumb|center]]
 </center>
-===== Złącza śrubowe (zewnętrzny czujnik EXTIN) =====
+===== Simulator's board switches =====
-Do płytki symulatora I/O można dołączyć zewnętrzny czujnik o napięciu wyjściowym nie przekraczającym 5 V. Zasilanie 5 V dla czujnika zewnętrznego jest dostępne na złączu śrubowym po prawej stronie płytki. Przykładem współpracującego modułu czujnika jest [https://kamami.pl/odleglosci/560840-sharp-gp2y0a60szlf-analogowy-czujnik-odleglosci-10-150cm-5v.html Pololu - 2474]. Sposób dołączenia pokazano na fotografii poniżej:
+The IO simulator module is equipped with toggle switches marked as INP: I1-I8, , which sets the digital states on each lines of the LOGO! 8 module. Selectors INP: I7, I8 can be used to connect the analog signals to LOGO! 8 ADC's. Using two switches "SEL", You can configure the signal character on the I7/I8 lines (by connecting to supply voltages for bit simulation or by connecting to a analog lines).
+Slide switches allows to configure the analog inputs. Line Al1 might be connected to ALS sensor (LIGHT) or potentiometer (POT). For the Al2 line You can select readings from temperature sensor (TEMP) or external analog input (EXTIN).
 <center>
-[[Plik:KA-LOGO!-IO-Simulator_zlacze_extin.png|none|600px|thumb|center]]
+{| class="wikitable"  style="width: 1000px;"
+|-
+! style="text-align: center;"|Switch
+! style="text-align: center;"|Position
+! style="text-align: center;"|Description
+|-
+| rowspan="2" style=" text-align: center; "|I1...I8
+| style="text-align: center;"|0
+| style="text-align: center;"|Low logic level on the I1...I8 lines
+|-
+| style="text-align: center;"|1
+| style="text-align: center;"|High logic level on the I1...I8 lines
+|-
+| rowspan="2" style=" text-align: center; "|SEL [I7/Al1]
+| style="text-align: center;"|I7
+| style="text-align: center;"|I7 switch sets the logical states
+|-
+| style="text-align: center;"|Al1
+| style="text-align: center;"|The I7 voltage depends on the analog value from ALS sensor or potentiometer
+|-
+| rowspan="2" style=" text-align: center; "|SEL [I8/Al2]
+| style="text-align: center;"|I8
+| style="text-align: center;"|I8 switch sets the logical states
+|-
+| style="text-align: center;"|Al2
+| style="text-align: center;"|The I8 voltage depends on the analog value from temperature sensor or the EXTIN input
+|-
+| rowspan="2" style=" text-align: center; "|LIGHT/POT
+| style="text-align: center;"|LIGHT
+| style="text-align: center;"|Analog voltage measures from the ALS sensor
+|-
+| style="text-align: center;"|POT
+| style="text-align: center;"|Analog voltage measures from the potentiometer slide.
+|-
+| rowspan="2" style=" text-align: center; "|TEMP/EXTIN
+| style="text-align: center;"|TEMP
+| style="text-align: center;"|Analog voltage measures from the temperature sensor
+|-
+| style="text-align: center;"|EXTIN
+| style="text-align: center;"|Analog voltage measures from the EXTIN input
+|}
 </center>
-===== Tuleje dystansowe =====
+===== Potentiometer =====
-Znajdujące się w zestawie dwie tuleje dystansowe należy zamontować do płytki KA-LOGO!-IO-Simulator, by zapobiec powstawaniu naprężeń płytki (i wiążącej się z tym, nadmiernej eksploatacji złącz śrubowych sterownika) podczas obsługi modułu. Sposób montażu tulei do płytki symulatora IO przedstawiono na fotografii:
+The potentiometer on the IO simulator board could be connected to the I7 line. Voltage of the potentiometer slide has range from 0 to 10 Volts DC.
+===== Ambient Light Sensor =====
+The ALS sensor of the IO Simulation board could be connected to the I7 line of LOGO! 8. Output voltage of the photoresitor has range from 0 to 10 Volts DC (depending on ambient light level).
+===== Temperature sensor =====
+On the IO Simulator module the voltage matching circut is applied for temperature sensor MCP9700. It scales the temperature sensor output voltage to the ADC range of LOGO! 8 device.
+On the line I8, it is possible to obtain 0 to 10 V DC range (with 12-20mV margin from 10V line) for temperatures measured from +5 to +105 Centigrade degrees.
+===== External sensor connector (EXTIN) =====
+It is possible to connect a external sensor to the IO Simulator module. Output voltage of connected sensor must not be higher than 5V DC. 5V power supply for the external sensor is available on terminal block, located at right side.
+For example, the compatible external sensor is [https://kamami.pl/odleglosci/560840-sharp-gp2y0a60szlf-analogowy-czujnik-odleglosci-10-150cm-5v.html Pololu - 2474]. Connection method is shown on the image:
 <center>
-[[Plik:KA-LOGO!-IO-Simulator_tuleje_dystansowe.png|none|600px|thumb|center]]
+[[File:KA-LOGO!-IO-Simulator_zlacze_extin.png|none|600px|thumb|center]]
 </center>
-===== Linki zewnętrzne =====
+===== Spacer sleeves =====
-*[http://ep.com.pl/artykuly/11565-Przykladowa_aplikacja_LOGO_Cyfrowy_termometr_z_sygnalizacja_przekroczenia_progow.html Artykuł "Przykładowa aplikacja LOGO! 8. Cyfrowy termometr z sygnalizacją przekroczenia progów" na portalu EP]
+Included spacer sleeves needs to be mounted to the IO Simulator module for preventing a tensions of board (and the excessive exploitation of LOGO! 8 terminal blocks). The mountage method is shown on the foto:
+<center>
+[[File:KA-LOGO!-IO-Simulator_tuleje_dystansowe.png|none|600px|thumb|center]]
+</center>
-[[Kategoria:Sterowniki PLC]]
+===== External links =====
-[[Kategoria:Zawartość]]
+*[http://ep.com.pl/artykuly/11565-Przykladowa_aplikacja_LOGO_Cyfrowy_termometr_z_sygnalizacja_przekroczenia_progow.html Article (language: PL) "Sample application of LOGO! 8. Digital thermometer with signaling of over thresholds" on the EP portal]