KAmodLPS331: Difference between revisions

Latest revision as of 17:17, 1 November 2024

Description

KAmodLPS331 is a module, which bases on absolute pressure sensors LPS331. It is characterized by i.a. wide range and high resolution of measurement. Module allows to measurement of absolute pressure in range 260 - 1260hPa. Thanks to embedded voltage regulator and logic level translator, module can be used in system with power supply 2.5 - 5.5V.

Basic features and parameters

LPS331AP chip (MEMS pressure sensor) from STMicroelectronics
Measurement range: from 260 to 1260mbar of absolute pressure (260 - 1260hPa)
Measurement resolution: 0,02hPa RMS
Power supply voltage: 2.5V - 5.5V
Power consumption: 7mA
Measurement data rate (ODR): 1-25[Hz]
ADC converter resolution: 24 bits
Communication interface: SPI / I2C
Embedded voltage regulator and logic level translator (SDA and SCL lines)
Interrupt output / data ready output /FIFO flag
Place for soldering of pin header
Mounting holes 3mm
Module size (without connector): 27mm x 15mm x 3mm

Standard equipment

Code	Description
KAmodLPS331	Assembled and launched module Pin header (male and angle) for soldering

Electrical schematic

Outputs description

JP1	I2C	SPI 3-wire	SPI 4-wire
+3.3V	Module power supply
+VIN
GND
SDA/SDI/SDO	SDA	SDI/SDO	SDI
SCL/SPC	SCL	SPC	SPC
SDO/SA0	SA0	-	SDO
CS	CS	CS	CS
INT2/DRDY	Interrupt 2 output / data ready output
INT1/DRDY	Interrupt 2 output / data ready output

@@ Line 1: / Line 1: @@
 __jzpdf__
 ====== Description ======
-[https://kamami.pl/czujniki-cisnienia/558412-kamodlps331-modul-czujnika-cisnienia-atmosferycznego-z-ukladem-lps331.html KAmodLPS331] is a module, which bases on absolute pressure sensors LPS331. It is characterized by i.a. wide range and high resolution of measurement. Module allows to measurement of absolute pressure in range 260 - 1260hPa. Thanks to embedded voltage regulator and logic level translator, module can be used in system with power supply 2.5 - 5.5V.
+[https://kamami.pl/en/pressure-sensors/558412-kamodlps331-atmospheric-pressure-sensor-module-with-lps331-chip-5906623432554.html KAmodLPS331] is a module, which bases on absolute pressure sensors LPS331. It is characterized by i.a. wide range and high resolution of measurement. Module allows to measurement of absolute pressure in range 260 - 1260hPa. Thanks to embedded voltage regulator and logic level translator, module can be used in system with power supply 2.5 - 5.5V.
 <center>
-[[Plik:KAmodLPS331_modul.png|none|400px|thumb|center]]
+[[File:KAmodLPS331_modul.png|none|400px|thumb|center]]
 </center>
@@ Line 30: / Line 30: @@
 |-
 | style="text-align: center;"|<b>KAmodLPS331</b>
-| style="text-align: center;"|
+| style="text-align: left;"|
 *Assembled and launched module
 *Pin header (male and angle) for soldering
@@ Line 38: / Line 38: @@
 ===== Electrical schematic =====
 <center>
-[[Plik:KAmodLPS331_schemat.png|none|800px|thumb|center]]
+[[File:KAmodLPS331_schemat.png|none|600px|thumb|center]]
 </center>
 ===== Outputs description =====
@@ Line 45: / Line 46: @@
 {| class="wikitable"  style="width: 1000px;"
 |-
-! style="text-align: center;" rowspan="10"| [[Plik:KAmodLPS331 obrys PCB.png|center|200px]]
+! style="text-align: center;" rowspan="10"| [[File:KAmodLPS331 obrys PCB.png|center|200px]]
 ! style="text-align: center;"|JP1
 ! style="text-align: center;"|I2C
@@ Line 90: / Line 91: @@
 *[https://github.com/pololu/lps-arduino Library for Arduino]
 *[http://mikrokontroler.pl/2016/08/01/projekt-kamodlps331-czujnik-cisnienia-atmosferycznego-kamduino-uno/ <nowiki>[</nowiki>Project<nowiki>]</nowiki> 'KAmodLPS331- czujnik ciśnienia atmosferycznego i KAmduino UNO' on MIKROKONTROLER.PL page ]
-[[Kategoria:Moduły peryferyjne KAmod (Kamami)]]
-[[Kategoria:Zawartość]]