Actions

ZL32PRG - Kamami USB Blaster PRO: Difference between revisions

From Kamamilabs.com - Wiki

← Older edit
No edit summary
No edit summary
Tag: Manual revert
 
(7 intermediate revisions by 3 users not shown)
Line 2: Line 2:
====== Description ======
====== Description ======
[https://kamami.pl/programatory/561847-zl32prg-kamami-usb-blaster-pro-programator-usb-dla-ukladow-pld-firmy-altera-zgodny-z-usb-blaster.html ZL32PRG - Kamami USB Blaster PRO] is a programmer and configurator for PLD's manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet.
[https://kamami.pl/programatory/561847-zl32prg-kamami-usb-blaster-pro-programator-usb-dla-ukladow-pld-firmy-altera-zgodny-z-usb-blaster.html ZL32PRG - Kamami USB Blaster PRO] is a programmer and configurator for PLD's manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet.
 
The ZL32PRG - Kamami USB Blaster PRO is a functional equalivent to the USB Blaster interface manufactured by Altera. Using this, You can in-system program CPLD's  and configurator's Flashes (with ISP interface). Also, it can configure FPGA devices.  
The ZL32PRG - Kamami USB Blaster PRO is a functional equalivent to the USB Blaster interface manufactured by Altera. Using this, You can in-system program CPLD's  and configurator's Flashes (with ISP interface). Also, it can configure FPGA devices.  
The programmer uses a USB port.
The programmer uses a USB port.


<center>
<center>
[[File:ZL32PRG_ Kamami_USB_Blaster_PRO.jpg|none|400px|thumb|center]]
[[File:ZL32PRG_Kamami_USB_Blaster_PRO.jpg|none|400px|thumb|center]]
</center>
</center>


Line 34: Line 34:
===== Connectors =====
===== Connectors =====
The ZL32PRG - Kamami USB Blaster PRO connects to a PC with microUSB connector. Target board may be connected with IDC10 cable or directly to the programmer
The ZL32PRG - Kamami USB Blaster PRO connects to a PC with microUSB connector. Target board may be connected with IDC10 cable or directly to the programmer
<center>[[File:Pinout of ZL32PRG.png|center|800px|thumb]]</center>
<center>[[File:Opis_wyprowadzeń_ZL32PRG_APJ.png|center|800px|thumb]]</center>
Check this colour graph above for signals pinout in modes:
Check this colour graph above for signals pinout in modes:
*<pre style="color: red">JTAG mode</pre>
*<pre style="color: red">JTAG mode</pre>
Line 49: Line 49:
Production process of ZL32PRG - Kamami USB Blaster PRO
Production process of ZL32PRG - Kamami USB Blaster PRO
<center><HTML5video type="youtube" width="560" height="315" autoplay="false">Dc4bNNhSelo</HTML5video></center>
<center><HTML5video type="youtube" width="560" height="315" autoplay="false">Dc4bNNhSelo</HTML5video></center>
[[Category:Programmers]]
[[Category:Content]]

Latest revision as of 10:25, 2 November 2024

Description

ZL32PRG - Kamami USB Blaster PRO is a programmer and configurator for PLD's manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet.

The ZL32PRG - Kamami USB Blaster PRO is a functional equalivent to the USB Blaster interface manufactured by Altera. Using this, You can in-system program CPLD's and configurator's Flashes (with ISP interface). Also, it can configure FPGA devices. The programmer uses a USB port.

Parameters
  • Can configure and program every CPLD, FPGA and memories-configurators made by Altera
  • Standard connector IDC10, compatible with Altera recomendations
  • Additional connector for direct connection to a target board
  • Logic levels on the output connector are compatible with TTL-LV, TTL, CMOS5, CMOS33.
  • Powered from USB port (microUSB connector)
Included
Code Description
ZL32PRG - Kamami USB Blaster PRO
  • Assembled and tested programmer
  • Ten conductors IDC10 cable (lenght: 0.3m/11.8inch)
  • USB A/B-micro cable
Connectors

The ZL32PRG - Kamami USB Blaster PRO connects to a PC with microUSB connector. Target board may be connected with IDC10 cable or directly to the programmer

Check this colour graph above for signals pinout in modes: 

  • JTAG mode
  • AS mode
  • PS mode
PWR/ACT diode

Bi-color PWR/ACT diode shows programmer status. Red colour of this LED indicates operation, the green colour indicates activity.

External links
Media

Production process of ZL32PRG - Kamami USB Blaster PRO

Retrieved from "http://wiki.kamamilabs.com/index.php?title=ZL32PRG_-_Kamami_USB_Blaster_PRO&oldid=4994"