Actions

KAmodMEMS2: Difference between revisions

From Kamamilabs.com - Wiki

m Text replacement - "__jzpdf__" to "__jzXpdf__"
m Text replacement - "__jzXpdf__" to "__jzpdf__"
Line 1: Line 1:
__jzXpdf__
__jzpdf__
===== Description =====
===== Description =====
KAmodMEMS2 is 3-axis motion sensor with SPI and I2C interfaces. Module is based on LIS35DE by STMicroelectronics.
KAmodMEMS2 is 3-axis motion sensor with SPI and I2C interfaces. Module is based on LIS35DE by STMicroelectronics.

Revision as of 07:17, 10 August 2018

Description

KAmodMEMS2 is 3-axis motion sensor with SPI and I2C interfaces. Module is based on LIS35DE by STMicroelectronics.


Basic features
  • LIS35DE – 3-axis motion sensor
  • Operating voltage from 2.16 to 3.6V
  • Low power consumption (<1mW)
  • I2C and SPI interfaces (Kamami standard connectors)
  • Two configurable interrupt generators
  • Single click, double click and free fall detection
  • Embedded high pass filter
  • 10000g shock survivalibility


Standard equipment
Code Description
KAmodMEMS2
  • Assembled module
Schematic


Board layout


SPI connector

Con2 connector has standard Kamami SPI pin layout (compatible with CAB_HU06 cable, ZL15AVR, ZL30ARM etc.). SPI interface is available also on Con1, which additionally has interrupt generator pins (INT1, INT2).



I2C connectors

KAmodMEMS2 module is equipped with I2C interface connectors: Con3, Con4, Con5. Con4 and Con5 have standard Kamami I2C pin layout (compatible with CAB_HU04 cable, ZL15AVR, ZL30ARM etc.). Con6 can be used to connect to interrupt generator lines while using I2C.