KAmodTFT2: Difference between revisions
From Kamamilabs.com - Wiki
m Text replacement - "__jzpdf__" to "__jzXpdf__" |
m Text replacement - "__jzXpdf__" to "__jzpdf__" |
||
Line 1: | Line 1: | ||
__jzpdf__ | |||
===== Description ===== | ===== Description ===== | ||
KAmodTFT2 is easy to use module with color graphic LCD (compatible with Nokia 6100/6610 cellular phone display). | KAmodTFT2 is easy to use module with color graphic LCD (compatible with Nokia 6100/6610 cellular phone display). |
Revision as of 07:17, 10 August 2018
Description
KAmodTFT2 is easy to use module with color graphic LCD (compatible with Nokia 6100/6610 cellular phone display).
Features
- 132×132 pixel LCD
- Compatible with Nokia 6100/6610 display (PCF8833 or similar controller)
- Power supply: 3.3 or 5VDC
- 3-lines serial interface
PCF8833 controller documentation is available at: http://www.nxp.com/acrobat_download2/datasheets/PCF8833_1.pdf. |
Standard equipment
Code | Description |
---|---|
KAmodTFT2 |
|
Module connectors
Pin number | Name | Description | Type |
---|---|---|---|
1 | CLK | Clock signal for DIN data line | Input |
2 | GND | Ground | Power supply |
3 | DIN | Data input line | Input |
4 | - | - | - |
5 | - | - | - |
6 | - | - | - |
7 | ~RES | Reset (high level active) | Input |
8 | - | - | - |
9 | +V | Power supply 3.3 or 5 VDC | Power supply |
10 | ~SCE | Serial interface enable (high level active)) | Input |
Supply voltage selection
KAmodTFT2 module can be supplied with 3.3 V or 5 V. Voltage can be selected with PWR jumper (JP1)