KAmodKB4x4: Difference between revisions
From Kamamilabs.com - Wiki
m Text replacement - "__jzXpdf__" to "__jzpdf__" |
Anna Kubacka (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
[[File:KAmodKB4x4.jpg|none|400px|thumb|center]] | [[File:KAmodKB4x4.jpg|none|400px|thumb|center]] | ||
</center> | </center> | ||
===== Basic features ===== | ===== Basic features ===== | ||
* 16-button matrix keyboard (4×4 organization) | * 16-button matrix keyboard (4×4 organization) | ||
Revision as of 07:29, 23 September 2020
Description
KAmodKB4×4 is easy to use matrix 4x4 keyboard designed to work with any digital system
Basic features
- 16-button matrix keyboard (4×4 organization)
- 10-pin connector
Standard equipment
| Code | Description |
|---|---|
| KAmodKB4×4 |
|
Keyboard layout
Schematics
Board layout
Connector
Matrix keyboard lines are available on Con1 connector as shown on figure below.
Module usage
KAmodKB4×4 is equipped with 2×5-pin connector (2.54mm raster), you can use it to connect module to any device using 10-wire flat cable (for example CAB_IDC10FF-30 available at kamami.com) or single cables (for example CAB_A available at kamami.com).
