KAmodRPi Pico Extension: Difference between revisions
From Kamamilabs.com - Wiki
Created page with "__jzpdf__ ====== Description ====== The [https://kamami.pl/ekspandery-portow-io/586681-plytka-rozszerzajaca-do-rasperry-pico-5906623432851.html KAmodRPi Pico Extension] module is a prototyping board that allows you to conveniently connect extensions to Raspberry Pi Pico. It allows you to lead out the module's pins to goldpin connectors. The board also contains connectors for connecting modules in other standards - Raspberry Pi overlays and KAmod modules with an I2C inter..." |
|||
Line 1: | Line 1: | ||
__jzpdf__ | __jzpdf__ | ||
====== Description ====== | ====== Description ====== | ||
The [https://kamami.pl/ | The [https://kamami.pl/en/io-port-expanders/586681-plytka-rozszerzajaca-do-rasperry-pico-5906623432851.html KAmodRPi Pico Extension] module is a prototyping board that allows you to conveniently connect extensions to Raspberry Pi Pico. It allows you to lead out the module's pins to goldpin connectors. The board also contains connectors for connecting modules in other standards - Raspberry Pi overlays and KAmod modules with an I2C interface. The last important element is the built-in prototyping board that allows you to solder the systems that work with Pico yourself. <center> | ||
[[File:KAmodRPi_Pico_Extension_01.jpg|none|700px|thumb|center]] | [[File:KAmodRPi_Pico_Extension_01.jpg|none|700px|thumb|center]] | ||
</center> | </center> | ||
===== Basic parameters ===== | ===== Basic parameters ===== | ||
* 40-pin GPIO connector for connecting HAT modules | * 40-pin GPIO connector for connecting HAT modules |
Latest revision as of 19:14, 2 November 2024
Description
The KAmodRPi Pico Extension module is a prototyping board that allows you to conveniently connect extensions to Raspberry Pi Pico. It allows you to lead out the module's pins to goldpin connectors. The board also contains connectors for connecting modules in other standards - Raspberry Pi overlays and KAmod modules with an I2C interface. The last important element is the built-in prototyping board that allows you to solder the systems that work with Pico yourself.
Basic parameters
- 40-pin GPIO connector for connecting HAT modules
- Universal board with 328 fields for easy prototyping
- 2x20-pin Pico pin extension connector
- KAMAMI I2C connector for connecting many KAmod series modules
- RESET button
- Dimensions: 71 x 112 mm
Standard equipment
Code | Description |
---|---|
KAmodRPi Pico Extension |
|
40-pin GPIO connector
The 40-pin extension connector is used to connect shields to the Raspberry Pi. It is compatible with most modules available on the market and provides access to SPI, I2C UART interfaces and numerous GPIO pins.
KAMAMI I2C connector
The KAMAMI I2C connector allows you to connect various modules from the KAmod series. The pins are connected to the I2C0 interface on GPIO0 and GPIO1 pins.
Prototype board
The module contains a universal prototyping board consisting of 328 holes. It allows you to solder a prototype circuit that is to work with the Raspberry Pi Pico board.