KAmodNFC: Difference between revisions

Revision as of 17:50, 5 July 2018

Description

KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C / RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.

Basic features and parameters

Chip M24LR64E-R - dynamic NFC tag / RFID from STMicroelectronics
Energy harvesting powers supply line on connector (+Vhr) with effciency max. 7mA
Embedded microstrip antenna, designed for work with frequency 13.56MHz
Connectors compatible with z Arduino UNO R3
Possibility of using another shield compatible with z Arduino UNO R3
Embedded tri color user RGB LED
Embedded module of work stabilization with energy harvesting
Mounting hole 3mm
Module size: 74mm x 52mm x 20mm

Standard equipment

Code	Description
KAmodNFC	Assembled and launched module

Electrical schematics

View of PCB

Output description

M24LR64E-R - tag RFID / NFC chip

M24LR64E-R is a dynamic NFC / RFID tag with 64kb EEPROM memory and dual communication interface – is is possible to use I2C communication bus as well as a radio track. Chip has a energy harvesting function and cooperates with microstrip antenna, which was designed for work with frequency 13.56MHz.

Line	Output		Function
	Arduino	STM32
SCL	D15	PB8	Clock line of I2C bus
SDA	D14	PB9	Data line of I2C bus
RFWIP/BUSY	D12	PA6	Write / busy signalization

Multicolor user LED

Embedded RGB user LED in SMD 5060 package make possible to signaling a variety of events by using three, controlled independent colors (red, green, blue).

Line	Output		Function
	Arduino	STM32
RGB LED R	D5	PB4	Red LED color
RGB LED G	D4	PB5	Green LED color
RGB LED B	D2	PA10	Blue LED color

Energy harvesting

In chip M24LR64E-R embedded function of energy harvesting allows to wireless power supply of devices with low power consumption (max. 7mA), when antenna of module is placed enough near from transmitter antenna (which use CR95HF chip). Power supply with harvesting energy is activated with using jumper “Harvesting Power”. Indicator starts periodically blinking with D2 LED, when on line +Vhr appears harvesting voltage from RF track.

Media

Video with presentation of KamodNFC module working

External links

Kategoria:Moduły peryferyjne KAmod (Kamami) Kategoria:Zawartość

@@ Line 4: / Line 4: @@
 <center>
-[[Plik:KAmodNFC_modul.png|none|500px|thumb|center]]
+[[File:KAmodNFC_modul.png|none|500px|thumb|center]]
 </center>
@@ Line 31: / Line 31: @@
 ===== Electrical schematics =====
 <center>
-[[Plik:KAmodNFC_schemat.png|none|800px|thumb|center]]
+[[File:KAmodNFC_schemat.png|none|800px|thumb|center]]
 </center>
 ===== View of PCB =====
 <center>
-[[Plik:KAmodNFC_obrys.png|none|400px|thumb|center]]
+[[File:KAmodNFC_obrys.png|none|400px|thumb|center]]
 </center>
 ===== Output description =====
 <center>
-[[Plik:KAmodNFC_opis_wyprowadzen.png|none|500px|thumb|center]]
+[[File:KAmodNFC_opis_wyprowadzen.png|none|500px|thumb|center]]
 </center>
@@ Line 49: / Line 49: @@
 <center>
-[[Plik:KAmodNFC_obrys_M24LR64.png|none|400px|thumb|center]]
+[[File:KAmodNFC_obrys_M24LR64.png|none|400px|thumb|center]]
@@ Line 79: / Line 79: @@
 |}
-[[Plik:KAmodNFC_schemat_M24LR64.png|none|800px|thumb|center]]
+[[File:KAmodNFC_schemat_M24LR64.png|none|800px|thumb|center]]
 </center>
@@ Line 87: / Line 87: @@
 <center>
-[[Plik:KAmodNFC_obrys_dioda.png|none|400px|thumb|center]]
+[[File:KAmodNFC_obrys_dioda.png|none|400px|thumb|center]]
@@ Line 118: / Line 118: @@
 |}
-[[Plik:KAmodNFC_schemat_dioda.png|none|300px|thumb|center]]
+[[File:KAmodNFC_schemat_dioda.png|none|300px|thumb|center]]
 </center>
@@ Line 126: / Line 126: @@
-[[Plik:KAmodNFC_obrys_EH.png|none|400px|thumb|center]]
+[[File:KAmodNFC_obrys_EH.png|none|400px|thumb|center]]
-[[Plik:KAmodNFC_schemat_EH.png|none|800px|thumb|center]]
+[[File:KAmodNFC_schemat_EH.png|none|800px|thumb|center]]
 </center>