KAmodLPS331: Difference between revisions

Revision as of 07:16, 10 August 2018

__jzXpdf__

Description

KAmodLPS331 is a module, which bases on absolute pressure sensors LPS331. It is characterized by i.a. wide range and high resolution of measurement. Module allows to measurement of absolute pressure in range 260 - 1260hPa. Thanks to embedded voltage regulator and logic level translator, module can be used in system with power supply 2.5 - 5.5V.

Basic features and parameters

LPS331AP chip (MEMS pressure sensor) from STMicroelectronics
Measurement range: from 260 to 1260mbar of absolute pressure (260 - 1260hPa)
Measurement resolution: 0,02hPa RMS
Power supply voltage: 2.5V - 5.5V
Power consumption: 7mA
Measurement data rate (ODR): 1-25[Hz]
ADC converter resolution: 24 bits
Communication interface: SPI / I2C
Embedded voltage regulator and logic level translator (SDA and SCL lines)
Interrupt output / data ready output /FIFO flag
Place for soldering of pin header
Mounting holes 3mm
Module size (without connector): 27mm x 15mm x 3mm

Standard equipment

Code	Description
KAmodLPS331	Assembled and launched module Pin header (male and angle) for soldering

Electrical schematic

Outputs description

JP1	I2C	SPI 3-wire	SPI 4-wire
+3.3V	Module power supply
+VIN
GND
SDA/SDI/SDO	SDA	SDI/SDO	SDI
SCL/SPC	SCL	SPC	SPC
SDO/SA0	SA0	-	SDO
CS	CS	CS	CS
INT2/DRDY	Interrupt 2 output / data ready output
INT1/DRDY	Interrupt 2 output / data ready output

@@ Line 1: / Line 1: @@
-__jzpdf__
+__jzXpdf__
 ====== Description ======
 [https://kamami.pl/czujniki-cisnienia/558412-kamodlps331-modul-czujnika-cisnienia-atmosferycznego-z-ukladem-lps331.html KAmodLPS331] is a module, which bases on absolute pressure sensors LPS331. It is characterized by i.a. wide range and high resolution of measurement. Module allows to measurement of absolute pressure in range 260 - 1260hPa. Thanks to embedded voltage regulator and logic level translator, module can be used in system with power supply 2.5 - 5.5V.