ZL5USB: Difference between revisions
From Kamamilabs.com - Wiki
m Text replacement - "__jzpdf__" to "__jzXpdf__" |
|||
| Line 1: | Line 1: | ||
__jzXpdf__ | |||
====== Description ====== | ====== Description ====== | ||
[https://kamami.pl/konwertery-usb-uart-rs232/562554-zl5usb-modul-konwertera-usb-uart-z-ukladem-cp2102-firmy-silabs.html ZL5USB] is a USB-UART converter module based on Silabs CP2102. It is especially recomended to use with the [http://kamami.com/boards/561438-maximator-promo-with-expander-shield-and-kamami-usb-blaster.html maXimator] evaluation board. The module has small sizes, microUSB connector and it can works with the 2.5V-5.5V signals. | [https://kamami.pl/konwertery-usb-uart-rs232/562554-zl5usb-modul-konwertera-usb-uart-z-ukladem-cp2102-firmy-silabs.html ZL5USB] is a USB-UART converter module based on Silabs CP2102. It is especially recomended to use with the [http://kamami.com/boards/561438-maximator-promo-with-expander-shield-and-kamami-usb-blaster.html maXimator] evaluation board. The module has small sizes, microUSB connector and it can works with the 2.5V-5.5V signals. | ||
Revision as of 07:16, 10 August 2018
__jzXpdf__
Description
ZL5USB is a USB-UART converter module based on Silabs CP2102. It is especially recomended to use with the maXimator evaluation board. The module has small sizes, microUSB connector and it can works with the 2.5V-5.5V signals.
Parameters
- Silabs CP2102 UART-USB IC
- Data transferring and power supply through the micro USB connector
- Can work with the 2,5 V - 5,5 V buses
- Signals SUSPEND, DTR, RTS, TXD, RXD connected to a jumper connector
- Supply from USB is available on the jumper connector
- Small sizes: 21mm x 20mm x 13mm
Included
| Code | Description |
|---|---|
| ZL5USB |
|
Wiring diagram
