KAmodTFT2: Difference between revisions
From Kamamilabs.com - Wiki
m Text replacement - "__jzXpdf__" to "__jzpdf__" |
|||
| Line 16: | Line 16: | ||
{| class="frame-green" | {| class="frame-green" | ||
|- | |- | ||
| PCF8833 controller documentation is available at: | | PCF8833 controller documentation is available at: https://download.kamami.pl/p138918-pcf8833_1.pdf. | ||
|} | |} | ||
===== Standard equipment ===== | ===== Standard equipment ===== | ||
Revision as of 07:53, 6 September 2018
Description
KAmodTFT2 is easy to use module with color graphic LCD (compatible with Nokia 6100/6610 cellular phone display).
Features
- 132×132 pixel LCD
- Compatible with Nokia 6100/6610 display (PCF8833 or similar controller)
- Power supply: 3.3 or 5VDC
- 3-lines serial interface
| PCF8833 controller documentation is available at: https://download.kamami.pl/p138918-pcf8833_1.pdf. |
Standard equipment
| Code | Description |
|---|---|
| KAmodTFT2 |
|
Module connectors
| Pin number | Name | Description | Type |
|---|---|---|---|
| 1 | CLK | Clock signal for DIN data line | Input |
| 2 | GND | Ground | Power supply |
| 3 | DIN | Data input line | Input |
| 4 | - | - | - |
| 5 | - | - | - |
| 6 | - | - | - |
| 7 | ~RES | Reset (high level active) | Input |
| 8 | - | - | - |
| 9 | +V | Power supply 3.3 or 5 VDC | Power supply |
| 10 | ~SCE | Serial interface enable (high level active)) | Input |
Supply voltage selection
KAmodTFT2 module can be supplied with 3.3 V or 5 V. Voltage can be selected with PWR jumper (JP1)
