KAmodTXS0108: Difference between revisions
From Kamamilabs.com - Wiki
Created page with "__jzpdf__ ====== Description ====== [https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html KAmodTXx0108] is a module with the TXS0108/TXB0108 system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many developme..." |
|||
| Line 1: | Line 1: | ||
__jzpdf__ | __jzpdf__ | ||
====== Description ====== | ====== Description ====== | ||
[https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html | [https://kamami.pl/en/voltage-converters/581753-modul-konwertera-stanow-logicznych--5906623433339.html KAmodTXS0108] is a module with the TXS0108 system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many development projects. | ||
<center> | <center> | ||
Revision as of 16:07, 1 March 2025
Description
KAmodTXS0108 is a module with the TXS0108 system from Texas Instruments. The system is an 8-channel voltage translator. Thanks to the built-in direction detection system, the module provides two-way signal flow without the need to use an additional pin. Thanks to its small dimensions, the product can be used in many development projects.
Basic Features
- Texas Instruments TXS0108E
- 8 Channels
- Level Shift: Bidirectional
- Power Supply:
- VCCA from 1.4 V to +3.6 V,
- VCCB from 1.7 V to +5.5 V,
- VCCA < VCCB
- Dimensions: 16 x 29 mm
Standard Equipment
| Code | Description |
|---|---|
| KAmodTXS0108 |
|
Schematic
Connection
Power supply: The converter requires power from two different sources. The higher voltage (from 1.7 V to 5.5 V) should be connected to the pin marked as VCC_B, and the lower voltage (from 1.4 V to 3.6 V) should be connected to VCC_A.
Ground: Both devices and the converter must have a common ground, so the ground wire should be connected to the pin marked as GND.
Logical signals: Signals should be connected to the appropriate connectors. Signals with a higher voltage should be connected to the Bx connectors, and signals with a lower voltage to the Ax connectors.
Dimensions
