ZL32PRG - Kamami USB Blaster PRO

Description

ZL32PRG - Kamami USB Blaster PRO is a programmer and configurator for PLD's manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet.

The ZL32PRG - Kamami USB Blaster PRO is a functional equalivent to the USB Blaster interface manufactured by Altera. Using this, You can in-system program CPLD's and configurator's Flashes (with ISP interface). Also, it can configure FPGA devices. The programmer uses a USB port.

Parameters

• Can configure and program every CPLD, FPGA and memories-configurators made by Altera
• Standard connector IDC10, compatible with Altera recomendations
• Additional connector for direct connection to a target board
• Logic levels on the output connector are compatible with TTL-LV, TTL, CMOS5, CMOS33.
• Powered from USB port (microUSB connector)

Included

Code	Description
ZL32PRG - Kamami USB Blaster PRO	Assembled and tested programmer Ten conductors IDC10 cable (lenght: 0.3m/11.8inch) USB A/B-micro cable

Connectors

The ZL32PRG - Kamami USB Blaster PRO connects to a PC with microUSB connector. Target board may be connected with IDC10 cable or directly to the programmer

File:Pinout of ZL32PRG.png

Check this colour graph above for signals pinout in modes:

• JTAG mode

• AS mode

• PS mode

PWR/ACT diode

Bi-color PWR/ACT diode shows programmer status. Red colour of this LED indicates operation, the green colour indicates activity.

External links

• Quartus Prime Lite - freeware FPGA tool

Media

Production process of ZL32PRG - Kamami USB Blaster PRO