KAmodRPi-GPRS-GPS

Description

KAmodRPi-GPRS-GPS is a HAT for Raspberry Pi 3B+/3B/2B/B+ minicomputers that allows sending data via GPRS, SMS messages and to communicate via Bluetooth. This expansion receives location from satellites – GPS and GLONASS.

Basic parameters

• Expansion module for Raspberry Pi 4B, 3B+, 3B, 2B, B+ minicomputers

• Chip MC60E from Quectel

• Embedded ID-EEPROM memory

• Backup battery holder (CR1220)

• microSIM card connector

• u.FL connectors for GSM, Bluetooth, GPS/GLONASS antennas

• Integrated LED for "NETL" status

Standard equipment

Code	Descritption
KAmodRPi-GPRS-GPS	Assembled and launched module Four spacers with a set of screws for mounting

Schematic

View of board

microSIM card connector

KAmodRPi-GPRS-GPS HAT has been equipped with microSIM card connector. Card should be mounted before powering the module. Card shouldn’t be removed while module is powered!

How to insert the microSIM card:

Spacers

Included four spacers should be screwed to the KamodGPRS-GPS module to improve stability and to prevent from board tension.

Dimensions

External links

• Quectel MC60 Series Hardware Design V2.0
• Quectel MC60 AT Commands manual v.1.1