KAmodLED8

Description

KAmodLED8 module allows observation of state of 8 lines with LEDs driven by digital buffers

Basic features

• 8 LEDs (lit by high logic level)
• 8-channel buffer (74LVC541)
• 5V input lines

• Supply voltage 2,7...5,5VDC
• 10-pin connector

Standard equipment

Code	Description
KAmodLED8	Assembled module

Schematics

Module layout

Connector

D0...D7 LEDs are lit by high level on D0...D7 inputs of Con1 connector. Con1 pinout is shown on figure below.

Module usage

KAmodLED8 module is equipped with 2×5-pin connector (2.54mm raster), you can use it to connect module to any device using 10-wire flat cable (for example CAB_IDC10FF-30 available at kamami.com) or single wires (for example CAB_A available at kamami.com).