Actions

KAmodRPi Pico Expansion

From Kamamilabs.com - Wiki

Revision as of 08:43, 2 November 2024 by Grzegorzbecker (talk | contribs) (→‎Basic parameters)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

KAmodRPi Pico Expansion - Raspberry Pi Pico Expansion Board with Screw Terminals
A universal board for Raspberry Pi Pico that outputs the computer's GPIO pins to male and female goldpin connectors, as well as screw terminals with labeled pins. The board is equipped with a standard female connector for direct connection to Raspberry Pi Pico. It has two sets (one male and one female) of 2x20 pin headers that allow you to connect additional expansion modules, plus all Raspberry Pi Pico pins are on screw connectors, which makes prototyping much easier and faster, without the need for soldering.

Basic parameters
  • 2x20 screw terminal connectors
  • 2x20 male pin header extending Pico pins
  • 2x20 female pin header extending Pico pins
  • 40x male-to-female jumper wires, in various colors, each 17 cm lon
  • Reset button
  • Dimensions: 59 x 61 mm
Standard equipment
Code Description
KAmodRPi Pico Expansion

40 x F-M connection cable

Assembled and started module

Complete set of connection cables

Electrical connection diagram

The electrical connections between the individual points are shown in the figure below.

Raspberry Pi Pico module mounting method

The Raspberry Pi Pico module can be mounted using goldpins as shown in the photos.



Dimensions

The dimensions of the KAmodRPi Pico Expansion board are: 61x59 mm