KAmodLSM6DS3
From Kamamilabs.com - Wiki
Description
KAmodLSM6DS3 is a module with MEMS LSM6DS3 type. Chip has a digital output (with using I2C or SPI interface) and allow to make a measurement of acceleration and angle velocity in three axis. Thanks to programmable interrupt outputs, it is possible e.g. wake up a microcontroller after free fall detection or object movement. Module can be used in system with power supply 2.5 - 5.5V.
Basic features and parameters
- LSM6DS3 chip (accelerometer and gyroscope) from STMicroelectronics
- Measurement range of accelerometer: ±2 / ±4 / ±8 / ±16g
- Measurement range of gyroscope: ±125 / ±245 / ±500 / ±1000 / ±2000 angle/second (dps)
- Power supply voltage: 2.5V - 5.5V
- Sleep mode / Low power mode
- Communication interface: SPI / I2C
- Embedded voltage regulator and logic level translator (SDA and SCL lines)
- Configurable interrupt generator
- Possibility of subordinate I2C interface connection (I2C HUB)
- Place for soldering of pin header
- Mounting holes 3mm
- Module size (without connector): 27mm x 16mm x 3mm
Standard equipment
Code | Description |
---|---|
KAmodLSM6DS3 |
|
Electrical schematic
Outputs description
JP1 | I2C | SPI 3-wire | SPI 4-wire | |
---|---|---|---|---|
+3.3V | Module power supply | |||
+VIN | ||||
GND | ||||
SDA | SDA | SDI/SDO | SDI | |
SCL | SCL | SPC | SPC | |
SDO/SA0 | SA0 | - | SDO | |
CS | CS | CS | CS | |
INT2 | Interrupt 2 output | |||
INT1 | Interrupt 1 output |