KAmodRPi Pico Expansion

Description

KAmodRPi Pico Expansion - Raspberry Pi Pico Expansion Board with Screw Terminals
A universal board for Raspberry Pi Pico that outputs the computer's GPIO pins to male and female goldpin connectors, as well as screw terminals with labeled pins. The board is equipped with a standard female connector for direct connection to Raspberry Pi Pico. It has two sets (one male and one female) of 2x20 pin headers that allow you to connect additional expansion modules, plus all Raspberry Pi Pico pins are on screw connectors, which makes prototyping much easier and faster, without the need for soldering.

Basic parameters

• 2x20 pin screw connectors
• 2x20 pin male connector extending Pico pins
• 2x20 pin female connector extending Pico pins
• 40x male-female jumper wires, in different colors, 17 cm long
• Reset button
• Dimensions: 59 x 61 mm

Standard equipment

Code	Description
KAmodRPi Pico Expansion 40 x F-M connection cable	Assembled and started module Complete set of connection cables

Electrical connection diagram

The electrical connections between the individual points are shown in the figure below.

Raspberry Pi Pico module mounting method

The Raspberry Pi Pico module can be mounted using goldpins as shown in the photos.

Dimensions

The dimensions of the KAmodRPi Pico Expansion board are: 61x59 mm