KAmodMEMS2

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Description

KAmodMEMS2 is 3-axis motion sensor with SPI and I2C interfaces. Module is based on LIS35DE by STMicroelectronics.

Basic features

LIS35DE – 3-axis motion sensor
Operating voltage from 2.16 to 3.6V
Low power consumption (<1mW)
I2C and SPI interfaces (Kamami standard connectors)
Two configurable interrupt generators
Single click, double click and free fall detection
Embedded high pass filter
10000g shock survivalibility

Standard equipment

Code	Description
KAmodMEMS2	Zmotowana płytka modułu

Schematic

Board layout

SPI connector

Con2 connector has standard Kamami SPI pin layout (compatible with CAB_HU06 cable, ZL15AVR, ZL30ARM etc.). SPI interface is available also on Con1, which additionally has interrupt generator pins (INT1, INT2).

I2C connectors

KAmodMEMS2 module is equipped with I2C interface connectors: Con3, Con4, Con5. Con4 and Con5 have standard Kamami I2Cpin layout (compatible with CAB_HU04 cable, ZL15AVR, ZL30ARM etc.). Con6 can be used to connect to interrupt generator lines while using I2C.