Actions

KAmodRPi Cobbler

From Kamamilabs.com - Wiki

Revision as of 20:06, 2 November 2024 by Grzegorzbecker (talk | contribs) (Created page with "__jzpdf__ ===== Description ===== [https://kamami.pl/en/raspberry-pi-prototyping/580978-kamami-gpio-cobbler-dla-raspberry-pi-234-5906623433322.html KAmodRPi Cobbler] - adapter Raspberry Pi 5 / 4 / 3 / Pi 2 / A + / B + Cobbler for contact plate<br> The adapter allows you to connect the GPIO connector of Raspberry Pi 5, Raspberry Pi 4, Raspberry Pi 3, Pi 2 and Pi+ to a breadboard with a pitch of 2.54 mm using the included 40-wire ribbon cable. The distance between the rows...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

KAmodRPi Cobbler - adapter Raspberry Pi 5 / 4 / 3 / Pi 2 / A + / B + Cobbler for contact plate
The adapter allows you to connect the GPIO connector of Raspberry Pi 5, Raspberry Pi 4, Raspberry Pi 3, Pi 2 and Pi+ to a breadboard with a pitch of 2.54 mm using the included 40-wire ribbon cable. The distance between the rows of pins is only 10.16 mm, which means it takes up the least amount of space on the breadboard, providing greater freedom of design.

Standard Equipment
Code Description
KAmodRPi Cobbler
  • Assembled adapter for Raspberry Pi
Connecting ribbon cable
  • 15 cm long connecting tape



Example of use