KAmodRPI Pico Protoboard

Description

KAmodRPI Pico Protoboard - Prototyping board for Raspberry Pi Pico
The KAmodRPI Pico Protoboard is a prototyping board featuring three areas of plated-through holes in a standard 2.54 mm pitch, designed for the Raspberry Pi Pico. The central area consists of 6x20 holes, while the two side areas feature 9x20 holes each. The board is supplied without pre-soldered connectors, allowing users to choose whether the Raspberry Pi Pico will be soldered directly to the board or connected via 20-pin female headers. Additionally, the board is equipped with two 20-pin rows of goldpins that are clearly labeled and provide access to all Raspberry Pi Pico module signals.

---

Basic Parameters

• Standard 2x20 pin layout for Raspberry Pi Pico
• 20-pin male connectors with all RPi Pico signals broken out
• Features a grid of plated-through holes arranged in a standard 2.54 mm pitch
• Labeled RPi Pico pinouts for easy identification of individual signals
• The Raspberry Pi Pico module can be mounted using goldpins or directly on the board surface
• Board dimensions: 52x93 mm

---

Standard Equipment

Code	Description
KAmodRPI Pico Protoboard	KAmod RPI Pico Protoboard PCB 2 x 20-pin female header (2.54 mm) 2 x 20-pin male header (2.54 mm)

---

Dimensions

The board dimensions are 52x93 mm. There are 4 mounting holes with a diameter of 2.7 mm on the board.

---