KAmod DCDC AP63200
From Kamamilabs.com - Wiki
Description
KAmod DCDC AP63200 - Miniature switching voltage regulator based on the AP63200 chip
KAmod DCDC AP63200 is a compact switching regulator module. With small dimensions of 18x11 mm, it can operate with an input voltage of up to 32 V and an output load of up to 1.5 A. The module is available in several versions with precisely set output voltages. Available variants include: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, and 15 V.
Basic Parameters
- Input voltage range: 3.5…32 V
- Maximum continuous output current: 1 A
- Maximum peak output current: 1.5 A (duration depends on thermal conditions)
- Available with output voltages: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, or 15 V
- Switching regulator type: AP63200
- DC/DC converter operating frequency: 500 kHz
- Efficiency: approx. 90% at 1 A load
- Protection against overvoltage, overload, and overheating
- Compact dimensions: 18x11 mm
- Input voltage should be at least 1 V higher than the expected output voltage
Standard Equipment
| Code | Description |
|---|---|
| KAmod DCDC AP63200 |
|
Connection Diagram
There are pads with holes on the edges of the module board, arranged according to a 2.54 mm pitch. Goldpin headers or wires can be soldered to them. The power input (WEJ) and output (WYJ) each have 2 pads located on opposite ends of the board, allowing the module to be optimally fitted to the target application.
Output Voltage
The KAmod DCDC AP63200 module is available with a strictly defined output voltage. Variants include: 2.5 V, 3.3 V, 4.2 V, 5 V, 8.4 V, 12 V, or 15 V. The version designation is located on the bottom of the PCB. A marker is placed next to the corresponding voltage—for example, for a 15 V module, the marker will appear as shown in the figure:
Dimensions
The exact dimensions of the module are 17.8x10.7 mm. There are pads with holes on the edges of the module board, arranged according to a 2.54 mm pitch.
