Actions

KAmodHTS221 (PL)

Revision as of 08:50, 26 June 2018 by Anna Kubacka (talk | contribs) (Utworzono nową stronę "__jzpdf__ ====== Description ====== [https://kamami.pl/czujniki-wilgotnosci/558410-kamodhts221-modul-czujnika-wilgotnosci-temperatury-z-ukladem-hts221.html KAmodHTS221]...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

KAmodHTS221 is a module, which allow to make a measurement of humidity and temperature. Thanks to embedded voltage regulator and logic level translator, it can be used in embedded system with power supply 2.5 - 5.5V. Module KAmodHTS221 bases on humidity / temperature sensor HTS221 from STMicroelectronics. The characteristic features of this sensor are: measurement possibility in range 0 - 60°C or air humidity in range 0 - 100%.


none|400px|thumb|center

Basic features and parameters
  • Humidity / temperature sensor HTS221 from STMicroelectronics company
  • Measurement range: 0 - 100% (humidity) / 0 - 60°C (temperature)
  • Humidity measurement accuracy: ± 6% (0 - 100% RH) / ± 4.5% (20 - 80% RH)
  • Temperature measurement accuracy: ± 1°C (0 - 60°C) / ± 0.5°C (15 - 40°C)
  • Power supply voltage: 2.5V - 5.5V
  • Power consumption: 9mA
  • Measurement data rate (ODR): 1 - 12.5[Hz]
  • ADC converter resolution: 16 bits
  • Communication interface: SPI / I2C
  • Embedded voltage regulator and logic level translator (SDA and SCL lines)
  • Data ready output (DRDY)
  • Place for soldering of pin header
  • Mounting holes 3mm
  • Module size (without connector): 24mm x 15mm x 3mm
Standard equipment
Code Description
KAmodHTS221
  • Assembled and launched module
  • Pin header (male and angle) for soldering
Electrical schematic

none|800px|thumb|center

Outputs description
center|200px JP1 I2C SPI
+3.3V Module power supply
+VIN
GND
SDA/SDI/SDO SDA SDI/SDO
SCL/SPC SCL SPC
SDO/SA0 SA0 -
GND Additional ground
CS CS CS
DRDY Data ready signalization
External links

Kategoria:Moduły peryferyjne KAmod (Kamami) Kategoria:Zawartość