View source for KAmodKB4x4 - Kamamilabs.com

__jzpdf__
====== Description ======
KAmodKB4×4 is easy to use matrix 4x4 keyboard designed to work with any digital system 

<center>
[[File:KAmodKB4x4.jpg|none|400px|thumb|center]]
</center>
 
===== Basic features =====
* 16-button matrix keyboard (4×4 organization)
* 10-pin connector 


===== Standard equipment  =====
<center>
{| class="wikitable"  style="width: 1000px;"
|-
! style="text-align: center;"|Code
! style="text-align: center;"|Description
|-
| style="text-align: center;"|<b>KAmodKB4×4</b>
| style="text-align: left;"|
* Assembled module 
|}
</center>

===== Keyboard layout  =====

<center>
[[File: KAmodKB4x4_KB.png|none|400px|thumb|center]]
</center>

===== Schematics  =====

<center>
[[File: KAmodKB4x4_schemat.png|none|400px|thumb|center]]
</center>

===== Board layout  =====

<center>
[[File:KAmodKB4x4_pcb.png|none|400px|thumb|center]]
</center>

===== Connector =====
Matrix keyboard lines are available on Con1 connector as shown on figure below. 

<center>
[[File: KAmodKB4x4_wypr.png|none|400px|thumb|center]]
</center>

===== Module usage =====
KAmodKB4×4 is equipped with 2×5-pin connector (2.54mm raster), you can use it to connect module to any device using 10-wire flat cable (for example CAB_IDC10FF-30 available at kamami.com) or single cables (for example CAB_A available at kamami.com). 


<center>
[[File: zl4st7+kamodkb4x4.jpg|none|400px|thumb|center]]
</center>