Actions

Difference between revisions of "KAmodL3GD20"

 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
__jzpdf__
 
__jzpdf__
 
====== Opis ======
 
====== Opis ======
[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodL3GD20] to moduł z układem MEMS typu L3GD20. Daje możliwość pomiaru prędkości kątowej w zakresie ±250 / ±500 / ±2000 stopni/sekundę. Może znaleźć zastosowanie w pomiarze przechyłu obiektu, jak i również jako uzupełnienie magnetometru oraz akcelerometru (np. [https://kamami.pl/kamod-kamami/557717-kamodlsm303-modul-akcelerometru-magnetometru-z-ukladem-lsm303d.html KAmodLSM303]) w precyzyjnym urządzeniu mierzącym wielkości fizyczne. Komunikacja z modułem odbywa się za pośrednictwem magistrali I2C lub SPI.
+
[https://kamami.pl/kamod-kamami/557724-kamodl3gd20-modul-zyroskopu-mems-z-ukladem-l3gd20-firmy-stmicroelectronics.html KAmodL3GD20] is a module with MEMS chip L3GD20 type. It allows to make measurement of angle velocity in range ±250 / ±500 / ±2000 angle per second. Module can be used for measurement of the object inclination and also as complement for magnetometer or accelerometer (e.g. KAmodLSM303) in precision measurement device of physical values. Communication with the module is realize by I2C or SPI interface.
 
+
 
<center>
 
<center>
[[Plik:KAmodL3GD20 moduł.png|none|400px|thumb|center]]
+
[[File:KAmodL3GD20_moduł.png|none|400px|thumb|center]]
 
</center>
 
</center>
  
===== Podstawowe cechy i parametry =====
+
===== Basic features and parameters =====
*Układ L3GD20 (żyroskop MEMS) firmy STMicroelectronics
+
*L3GD20 chip (MEMS gyroscope) from STMicroelectronics
*Zakres pomiarowy żyroskopu: ±250 / ±500 / ±2000 dps
+
*Measurement range of gyroscope: range ±250 / ±500 / ±2000 dps
*Napięcie zasilania: 2,5 - 5,5V
+
*Power supply voltage: 2.5V - 5.5V
*Tryb uśpienia oraz tryb niskiego poboru prądu
+
*Sleep mode and low power mode
*Interfejs komunikacyjny: SPI / I2C
+
*Communication interface: SPI / I2C
*Wbudowany stabilizator napięcia oraz translator poziomów sygnałów (linie SDA, SCL)
+
*Embedded voltage regulator and logic level translator (SDA and SCL lines)
*Wyprowadzona linia przerwania INT1
+
*Interrupt line INT1 on connector
*Wyprowadzona linia przerwania FIFO (INT2) / gotowości danych (DRDY)
+
*Interrupt FIFO (INT2) line on connector and data ready output (DRDY)
*Otwory do przylutowania złącza szpilkowego
+
*Place for soldering of pin header
*Otwory montażowe o średnicy 3 mm
+
*Mounting holes 3mm
*Wymiary modułu (bez złącza): 27 mm x 15 mm x 3 mm
+
*Module size (without connector): 27mm x 15mm x 3mm
===== Wyposażenie standardowe =====
+
===== Standard equipment =====
 
<center>
 
<center>
 
{| class="wikitable"  style="width: 1000px;"
 
{| class="wikitable"  style="width: 1000px;"
 
|-
 
|-
! style="text-align: center;"|Kod
+
! style="text-align: center;"|Code
! style="text-align: center;"|Opis
+
! style="text-align: center;"|Description
 
|-
 
|-
 
| style="text-align: center;"|<b>KAmodL3GD20</b>
 
| style="text-align: center;"|<b>KAmodL3GD20</b>
 
| style="text-align: center;"|
 
| style="text-align: center;"|
*Zmontowany i uruchomiony moduł
+
*Assembled and launched module
*Złącze szpilkowe (męskie proste oraz kątowe) do wlutowania
+
*Pin header (male and angle) for soldering
 
|}
 
|}
 
</center>
 
</center>
  
===== Schemat elektryczny =====
+
===== Electrical schematic =====
 
<center>
 
<center>
[[Plik:KAmodL3GD20_schemat.png|none|800px|thumb|center]]
+
[[File:KAmodL3GD20_schemat.png|none|800px|thumb|center]]
 
</center>
 
</center>
===== Opis wyprowadzeń =====
+
===== Outputs description =====
  
 
<center>
 
<center>
 
{| class="wikitable"  style="width: 1000px;"
 
{| class="wikitable"  style="width: 1000px;"
 
|-
 
|-
! style="text-align: center;" rowspan="10"| [[Plik:KAmodL3GD20 obrys PCB.png|center|200px]]
+
! style="text-align: center;" rowspan="10"| [[File:KAmodL3GD20 obrys PCB.png|center|200px]]
 
! style="text-align: center;"|JP1
 
! style="text-align: center;"|JP1
 
! style="text-align: center;"|I2C
 
! style="text-align: center;"|I2C
Line 49: Line 49:
 
|-
 
|-
 
| style="text-align: center;"|+3.3V
 
| style="text-align: center;"|+3.3V
| rowspan="3" colspan="3" style="text-align: center;" |Zasilanie modułu
+
| rowspan="3" colspan="3" style="text-align: center;" |Module power supply
 
|-
 
|-
 
| style="text-align: center;"|+VIN
 
| style="text-align: center;"|+VIN
Line 76: Line 76:
 
|-
 
|-
 
| style="text-align: center;"|INT2/DRDY
 
| style="text-align: center;"|INT2/DRDY
| colspan="3" style="text-align: center;" |Wyjście przerwania 2/sygnał gotowości danych
+
| colspan="3" style="text-align: center;" |Interrupt 2 output / data ready signal
 
|-
 
|-
 
| style="text-align: center;"|INT1
 
| style="text-align: center;"|INT1
| colspan="3" style="text-align: center;" |Wyjście przerwania 1
+
| colspan="3" style="text-align: center;" |Interrupt 1 output
 
|}
 
|}
 
</center>
 
</center>
===== Linki zewnętrzne =====
+
===== External links =====
*[http://download.kamami.pl/p557724-KAmodL3GD20_L3GD20_DS.pdf Karta katalogowa układu L3GD20]
+
*[http://download.kamami.pl/p557724-KAmodL3GD20_L3GD20_DS.pdf L3GD20 chip datasheet]
*[http://hobbyspace.pl/zyroskop-l3gd20-obsluga-w-arduino/ Artykuł "Żyroskop L3GD20 obsługa w Arduino" na portalu Hobbyspace.pl]
+
*[http://hobbyspace.pl/zyroskop-l3gd20-obsluga-w-arduino/ Article "Żyroskop L3GD20 - obsługa w Arduino" on Hobbyspace.pl]
 
 
[[Kategoria:Moduły peryferyjne KAmod (Kamami)]]
 
[[Kategoria:Zawartość]]
 

Latest revision as of 08:31, 23 September 2020

Opis

KAmodL3GD20 is a module with MEMS chip L3GD20 type. It allows to make measurement of angle velocity in range ±250 / ±500 / ±2000 angle per second. Module can be used for measurement of the object inclination and also as complement for magnetometer or accelerometer (e.g. KAmodLSM303) in precision measurement device of physical values. Communication with the module is realize by I2C or SPI interface.

KAmodL3GD20 moduł.png
Basic features and parameters
  • L3GD20 chip (MEMS gyroscope) from STMicroelectronics
  • Measurement range of gyroscope: range ±250 / ±500 / ±2000 dps
  • Power supply voltage: 2.5V - 5.5V
  • Sleep mode and low power mode
  • Communication interface: SPI / I2C
  • Embedded voltage regulator and logic level translator (SDA and SCL lines)
  • Interrupt line INT1 on connector
  • Interrupt FIFO (INT2) line on connector and data ready output (DRDY)
  • Place for soldering of pin header
  • Mounting holes 3mm
  • Module size (without connector): 27mm x 15mm x 3mm
Standard equipment
Code Description
KAmodL3GD20
  • Assembled and launched module
  • Pin header (male and angle) for soldering
Electrical schematic
KAmodL3GD20 schemat.png
Outputs description
KAmodL3GD20 obrys PCB.png
JP1 I2C SPI 3-wire SPI 4-wire
+3.3V Module power supply
+VIN
GND
SDA/SDI/SDO SDA SDI/SDO SDI
SCL/SPC SCL SPC SPC
SDO/SA0 SA0 - SDO
CS CS CS CS
INT2/DRDY Interrupt 2 output / data ready signal
INT1 Interrupt 1 output
External links