Actions

KAmodMEMS2

Revision as of 08:17, 10 August 2018 by Admin (talk | contribs) (Text replacement - "__jzXpdf__" to "__jzpdf__")

Description

KAmodMEMS2 is 3-axis motion sensor with SPI and I2C interfaces. Module is based on LIS35DE by STMicroelectronics.

Kamodmems2.jpg


Basic features
  • LIS35DE – 3-axis motion sensor
  • Operating voltage from 2.16 to 3.6V
  • Low power consumption (<1mW)
  • I2C and SPI interfaces (Kamami standard connectors)
  • Two configurable interrupt generators
  • Single click, double click and free fall detection
  • Embedded high pass filter
  • 10000g shock survivalibility


Standard equipment
Code Description
KAmodMEMS2
  • Assembled module
Schematic
KAmodMEMS2 sch.png


Board layout
KAmodMEMS2 pcb.png


SPI connector

Con2 connector has standard Kamami SPI pin layout (compatible with CAB_HU06 cable, ZL15AVR, ZL30ARM etc.). SPI interface is available also on Con1, which additionally has interrupt generator pins (INT1, INT2).


KAmodMEMS2 spi pcb.png


I2C connectors

KAmodMEMS2 module is equipped with I2C interface connectors: Con3, Con4, Con5. Con4 and Con5 have standard Kamami I2C pin layout (compatible with CAB_HU04 cable, ZL15AVR, ZL30ARM etc.). Con6 can be used to connect to interrupt generator lines while using I2C.


KAmodMEMS2 i2c pcb.png


Kamodmems2 zl15avr.jpg