Actions

Difference between revisions of "KAmodRPi-Pmod-HAT"

(Created page with "__jzpdf__ ====== Description ====== [https://kamami.pl/... KAmodRPi-Pmod-HAT] is a HAT for Raspberry Pi 4B/3B+/3B/2B/B+ minicomputers that allows use of the communication inte...")
 
(Description)
Line 1: Line 1:
 
__jzpdf__
 
__jzpdf__
 
====== Description ======
 
====== Description ======
[https://kamami.pl/... KAmodRPi-Pmod-HAT] is a HAT for Raspberry Pi 4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector. The overlay provides connectors in the Pmod standard and in the KAMAMI standard for I2C, SPI and UART interfaces.
+
[https://kamami.pl/moduly-rozszerzajace-do-raspberry-pi/572088-kamodrpi-pmod-hat-ekspander-zlacz-dla-raspberry-pi.html KAmodRPi-Pmod-HAT] is a HAT for Raspberry Pi 4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector. The overlay provides connectors in the Pmod standard and in the KAMAMI standard for I2C, SPI and UART interfaces.
  
 
<center>
 
<center>

Revision as of 12:00, 7 October 2019

Description

KAmodRPi-Pmod-HAT is a HAT for Raspberry Pi 4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector. The overlay provides connectors in the Pmod standard and in the KAMAMI standard for I2C, SPI and UART interfaces.

KAmodRPi-Pmod-HAT modul.png
Basic parameters
  • Expansion module for Raspberry Pi 4B, 3B+, 3B, 2B, B+ minicomputers
  • Embedded ID-EEPROM memory
  • Connectors for I2C, SPI and UART interfaces
  • Pmod connectors
  • KAMAMI connectors
  • 40-pin through connector compatible with the Raspberry Pi standard
  • Embedded jumpers enabling pull-up on I2C bus lines
  • Mounting holes with a diameter of 2.5 mm
  • Dimensions: 65 mm x 56 mm x 10 mm
Standard equipment
Code Description
KAmodRPi-Pmod-HAT
  • Aassembled and launched module
  • Four spacers with a set of screws for mounting
Schematic
KAmodRPi-Pmod-HAT schemat.png
Pin description - I2C KAMAMI standard connector
KAmodRPi-Pmod-HAT i2c kamami.png
Pin number Function
1 (VDD_3,3V) Power supply (max. 3,3 V)
2 (SCL) Clock line of the I2C bus
3 (SDA) Data line of the I2C bus
4 (GND) Ground
Opis wyprowadzeń – złącze SPI standardu KAMAMI
KAmodRPi-Pmod-HAT spi kamami.png
Pin number Function
1 (VDD_3,3V) Power supply (max. 3,3 V)
2 (CS) CS line of the SPI bus
3 (MOSI) Data line to peripheral chip of the SPI bus
4 (MISO) Data line from peripheral chip of the SPI bus
5 (CLK) Clock line of the SPI bus
6 (GND) Ground
Opis wyprowadzeń – złącze I2C standardu Pmod
KAmodRPi-Pmod-HAT i2c pmod.png
Pin number Function
1, 2 (SCL) Clock line of the I2C bus
3, 4 (SDA) Data line of the I2C bus
5, 6 (GND) Ground
7, 8 (VDD_3,3V) Power supply (max. 3,3 V)
9, 10 (INT) Interrupt line
11, 12 (RESET) Reset line
Opis wyprowadzeń – złącze SPI standardu Pmod
KAmodRPi-Pmod-HAT spi pmod.png
Pin number Function Pin number Function
1 (CS) CS line of the SPI bus 7 (INT SPI) Interrupt line
2 (MOSI) Data line to peripheral chip of the SPI bus 8 (RESET SPI) Reset line
3 (MISO) Data line from peripheral chip of the SPI bus 9 (GPIO20) Linia I/O
4 (CLK) Clock line of the SPI bus 10 (GPIO18) Linia I/O
5 (GND) Ground 11 (GND) Ground
6 (VDD_3,3V) Power supply (max. 3,3 V) 12 (VDD_3,3V) Power supply (max. 3,3 V)
Opis wyprowadzeń – złącze UART standardu Pmod
KAmodRPi-Pmod-HAT uart pmod.png
Pin number Function
1 (CTS) CTS line of the UART bus
2 (TXD) TX data line of the UART bus
3 (RXD) RX data line of the UART bus
4 (RTS) RTS line of the UART bus
5 (GND) Ground
6 (VDD_3,3V) Power supply (max. 3,3 V)
I2C bus lines

The KAmodRPi-Pmod-HAT module is equipped with jumpers that allow the connection of pull-up resistors to the VCC to the I2C bus line. Jumpers allow the independent activation of chin up for SDA and SCL lines.

KAmodRPi-Pmod-HAT obrys i2c.png
Write protection of the ID EEPROM memory

The KAmodRPi-Pmod-HAT module is equipped with a jumper that allows write block to EEPROM memory. Write Protect protects against unwanted attempts to write data to memory.

KAmodRPi-Pmod-HAT obrys wp.png
Dimensions
KAmodRPi-Pmod-HAT wymiary PCB.png