KA-Nucleo-Multisensor: Difference between revisions
From Kamamilabs.com - Wiki
m Text replacement - "__jzXpdf__" to "__jzpdf__" |
No edit summary |
||
| (11 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
__jzpdf__ | __jzpdf__ | ||
====== Description ====== | ====== Description ====== | ||
[https://kamami.pl/kamod-kamami/563404-ka-nucleo-multisensor-shield- | [https://kamami.pl/en/kamod-kamami-peripheral-modules/563404-ka-nucleo-multisensor-shield-for-stm32-nucleo-with-display-and-mems-sensors-5906623433278.html KA-Nucleo-Multisensor] is an expansion board (shield). It extends functionality of development board from STM32 Nucleo series. Shield has ST Morpho connectors and was equipped i.a. with 4-Digit 7-Segment LED Display, four RGB LEDs, accelerometer LIS35DE, pressure sensor LPS25HB and also digital thermometer DS18B20. | ||
<center> | <center> | ||
[[File:KA-Nucleo-Multisensor_ekspander.png|none|400px|thumb|center]] | [[File:KA-Nucleo-Multisensor_ekspander.png|none|400px|thumb|center]] | ||
| Line 11: | Line 11: | ||
*Shield that extends functionality of STM32 Nucleo-64 series boards | *Shield that extends functionality of STM32 Nucleo-64 series boards | ||
*On-board 7-Segment Display (4-Digit, four decimal points) | *On-board 7-Segment Display (4-Digit, four decimal points) | ||
*On-board four tricolour LEDs | *On-board four tricolour LEDs | ||
*Embedded MEMS accelerometer type LIS35DE | *Embedded MEMS accelerometer type LIS35DE | ||
**Acceleration measurement in three axis | **Acceleration measurement in three axis | ||
**Measurement range: ±2g/±8g | **Measurement range: ±2g/±8g | ||
Latest revision as of 16:08, 1 November 2024
Description
KA-Nucleo-Multisensor is an expansion board (shield). It extends functionality of development board from STM32 Nucleo series. Shield has ST Morpho connectors and was equipped i.a. with 4-Digit 7-Segment LED Display, four RGB LEDs, accelerometer LIS35DE, pressure sensor LPS25HB and also digital thermometer DS18B20.
Basic features and parameters
- Shield that extends functionality of STM32 Nucleo-64 series boards
- On-board 7-Segment Display (4-Digit, four decimal points)
- On-board four tricolour LEDs
- Embedded MEMS accelerometer type LIS35DE
- Acceleration measurement in three axis
- Measurement range: ±2g/±8g
- Functional of “Click” recognition
- Interface: SPI
- Embedded MEMS pressure sensor type LPS25HB
- Measurement range: from 260 to 1260 mbar absolute pressure range (260 - 1260 hPa)
- Measurement resolution: 0,01 hPa RMS
- Measurement output data rate: (ODR): 1 – 25 [Hz]
- ADC converter resolution: 24 bits
- Interface: I2C
- Embedded temperature sensor DS18B20
- Temperature measurement in range -55°C do +125°C
- Temperature measurement precision w range -10°C do +85°C: ±0,5°C
- Interface: 1-Wire
- Embedded photoresistor for light intensity measurements in environment
- On-board two user push-buttons
- On-board miniUSB connector, which allows data transfer by using GPIO pins (PA11, PA12)
- Size: 70 x 54 x 28 mm
- Weight: 28 g
Standard equipment
| Code | Description |
|---|---|
| KA-Nucleo-Multisensor |
|
Electrical schematics
