Actions

KAmod USB-C Adapter: Difference between revisions

From Kamamilabs.com - Wiki

Created page with "__jzpdf__ ===== Description ===== <b>KAmod USB-C Adapter - Adapter with USB-C connector</b><br> Module [https://kamami.pl/en/usb-connectors/1195430-kamod-usb-c-adapter-adapter-ze-zlaczem-usb-c-5906623496709.html KAmod USB-C] The adapter allows you to connect a USB-C socket to almost any electronic system. Only basic signals are led out on the pin connector: 5 V power supply and D+ and D- lines. <center> none|800px|thumb|center </center..."
 
 
Line 27: Line 27:
| style="text-align: center;"|<b>KAmod USB-C Adapter</b>
| style="text-align: center;"|<b>KAmod USB-C Adapter</b>
| style="text-align: left;"|
| style="text-align: left;"|
* Assembled and powered up module
* Assembled and tested up module
* 1 x straight 4-pin goldpin header 2.54 mm pitch
* 1 x straight 4-pin goldpin header 2.54 mm pitch
* 1 x angled 4-pin goldpin header 2.54 mm pitch
* 1 x angled 4-pin goldpin header 2.54 mm pitch

Latest revision as of 16:37, 1 March 2025

Description

KAmod USB-C Adapter - Adapter with USB-C connector
Module KAmod USB-C The adapter allows you to connect a USB-C socket to almost any electronic system. Only basic signals are led out on the pin connector: 5 V power supply and D+ and D- lines.

Basic features and parameters
  • USB-C connector mounted on a small board
  • Only basic signals are output on the standard connector: 5 V power supply and D+ and D- lines
  • Protection against overload of the USB power line - polymer fuse
  • Small dimensions 16x10.5 mm



Standard equipment
Code Description
KAmod USB-C Adapter
  • Assembled and tested up module
  • 1 x straight 4-pin goldpin header 2.54 mm pitch
  • 1 x angled 4-pin goldpin header 2.54 mm pitch



Electrical diagram



Signal layout on the board
Designation Function
V Positive output voltage from USB with a value of approx. 5 V
G Power and signal ground
D-, D+ USB interface signal lines


Dimensions

The dimensions of the KAmod USB-C Adapter module are 16x10.5 mm. All pins are matched to a standard 2.54 mm grid. The board has cutouts to facilitate board attachment, all dimensions are shown in the drawing.