KAmod USB-C Adapter

Description

KAmod USB-C Adapter - Adapter with USB-C connector
Module KAmod USB-C The adapter allows you to connect a USB-C socket to almost any electronic system. Only basic signals are led out on the pin connector: 5 V power supply and D+ and D- lines.

Basic features and parameters

• USB-C connector mounted on a small board
• Only basic signals are output on the standard connector: 5 V power supply and D+ and D- lines
• Protection against overload of the USB power line - polymer fuse
• Small dimensions 16x10.5 mm

Standard equipment

Code	Description
KAmod USB-C Adapter	Assembled and tested up module 1 x straight 4-pin goldpin header 2.54 mm pitch 1 x angled 4-pin goldpin header 2.54 mm pitch

Electrical diagram

Signal layout on the board

Designation	Function
V	Positive output voltage from USB with a value of approx. 5 V
G	Power and signal ground
D-, D+	USB interface signal lines

Dimensions

The dimensions of the KAmod USB-C Adapter module are 16x10.5 mm. All pins are matched to a standard 2.54 mm grid. The board has cutouts to facilitate board attachment, all dimensions are shown in the drawing.